arcadeaction
Enthusiast
Hi,
1) My kit is now booting and plays 1944 when I turn it on, but I'm unable to change to any other game or use the LCD screen as it isn't on. If I hit the enter button, the monitor goes black and then after waiting a while (which I am assuming the system is reloading) 1944 boots up again.
2) When I power up, the LCD flashes on for a split second and then remains off. Pushing the Up or Down seemingly do nothing, but holding down the Enter button sometimes makes the LCD stay on but the LCD screen is blank without text. I have attempted to reseat the LCD cables many times (with power off of course). Pushing the Down and Enter at the same time apparently caused a fuse to blow in my JAMMA switcher card. I've fixed the JAMMA switcher and it works again. Could have been a coincidence, though it happened the exact moment of button pressing.
3) A Mac was used to load up the SD card, and I did it as instructed with formatting as Fat32 and doing the Terminal command to remove extra files created by OSX. I can attempt to use a PC if the issues are somehow connected.
The kit is an amazing work of art, just looking forward to figuring this out.
Thoughts are appreciated, thanks!
1) My kit is now booting and plays 1944 when I turn it on, but I'm unable to change to any other game or use the LCD screen as it isn't on. If I hit the enter button, the monitor goes black and then after waiting a while (which I am assuming the system is reloading) 1944 boots up again.
2) When I power up, the LCD flashes on for a split second and then remains off. Pushing the Up or Down seemingly do nothing, but holding down the Enter button sometimes makes the LCD stay on but the LCD screen is blank without text. I have attempted to reseat the LCD cables many times (with power off of course). Pushing the Down and Enter at the same time apparently caused a fuse to blow in my JAMMA switcher card. I've fixed the JAMMA switcher and it works again. Could have been a coincidence, though it happened the exact moment of button pressing.
3) A Mac was used to load up the SD card, and I did it as instructed with formatting as Fat32 and doing the Terminal command to remove extra files created by OSX. I can attempt to use a PC if the issues are somehow connected.
The kit is an amazing work of art, just looking forward to figuring this out.
Thoughts are appreciated, thanks!
Last edited: