Hello,
I'd like to ask if there is a possible solution for a long time problem with my F3 setup.
I have a recapped Taito F3 motherboard with the multi that sometimes if I power it up it does nothing (no fan spinning, no video, nothing).
If I discharge the board and the PSU (without changing any setting) it boots up again with no issue. I wasn't able to find a specific pattern on the power on fails it seems very random.
Do someone knows if there is some component to check?
I know the F3 wants an higher voltage and I usually use 5.10V, the issue was present before the recap too but the recap didn't help.
I'd like to ask if there is a possible solution for a long time problem with my F3 setup.
I have a recapped Taito F3 motherboard with the multi that sometimes if I power it up it does nothing (no fan spinning, no video, nothing).
If I discharge the board and the PSU (without changing any setting) it boots up again with no issue. I wasn't able to find a specific pattern on the power on fails it seems very random.
Do someone knows if there is some component to check?
I know the F3 wants an higher voltage and I usually use 5.10V, the issue was present before the recap too but the recap didn't help.