ThatArtGuy
Beginner
Anyone have a Namco NB-2 manual, or one specific for Mach Breakers?
Hammy did a great job with my board, but when I connected it, the board had the same issues. So, remembering Troubleshooting 101, I placed it directly on the JAMMA harness, and it worked flawlessly. So it must be th switcher.
I contacted the manufacturer and they said that the switcher only supports mono and not stereo. I know Mach Breakers has a software switch for this, but it isn't making any change. Numan Athletics has a physical jumper, and it is set to stereo and works fine.
Here are two videos that show what is going on. The first is how it is on the switcher. The second is on the JAMMA harness directly.
View: https://youtu.be/y5DvGZ-9Zsk
View: https://youtu.be/0z73zQd4tu0
Thanks in advance for any help.
Hammy did a great job with my board, but when I connected it, the board had the same issues. So, remembering Troubleshooting 101, I placed it directly on the JAMMA harness, and it worked flawlessly. So it must be th switcher.
I contacted the manufacturer and they said that the switcher only supports mono and not stereo. I know Mach Breakers has a software switch for this, but it isn't making any change. Numan Athletics has a physical jumper, and it is set to stereo and works fine.
Here are two videos that show what is going on. The first is how it is on the switcher. The second is on the JAMMA harness directly.
Thanks in advance for any help.