Updated this thread because I’m now drawing a blank on another issue, kept the first post at the end of this for brevity.
I swapped out the Tekken 3 that wasn’t crediting for another (semi functional) one I had on the shelf.
this board had a dodgy video board originally so I’ve swapped it for another I had and now this game plays completely blind.
There seems to be some signal getting through as it will show some artefact if when I (blindly) navigate to the JVS option screen and swap between component/rgb out.
Otherwise I’m getting absolutely nothing. It doesn’t seem to show anything vi Jamma either.
Any ideas?
TLDR game boots, there’s audio, can hear credit noise but shows nothing on screen - tested with two system 12 video boards
ORIGINAL MESSAGE:
Hi folks, bit of a weird one this.
I’ve got a Tekken 3 running in one of my Vewlix cabs via JVS rather than Jamma but after being left on for any stretch of time it stops crediting and won’t allow the menu to be accessed. Has anyone ran into this problem, if so - what could be causing it.
I’ve had a poke around to see if it could be any missing components or something not making connection but there isn’t anything particularly obvious and I’m kind of drawing a blank?
Cheers in advance
I swapped out the Tekken 3 that wasn’t crediting for another (semi functional) one I had on the shelf.
this board had a dodgy video board originally so I’ve swapped it for another I had and now this game plays completely blind.
There seems to be some signal getting through as it will show some artefact if when I (blindly) navigate to the JVS option screen and swap between component/rgb out.
Otherwise I’m getting absolutely nothing. It doesn’t seem to show anything vi Jamma either.
Any ideas?
TLDR game boots, there’s audio, can hear credit noise but shows nothing on screen - tested with two system 12 video boards
ORIGINAL MESSAGE:
Hi folks, bit of a weird one this.
I’ve got a Tekken 3 running in one of my Vewlix cabs via JVS rather than Jamma but after being left on for any stretch of time it stops crediting and won’t allow the menu to be accessed. Has anyone ran into this problem, if so - what could be causing it.
I’ve had a poke around to see if it could be any missing components or something not making connection but there isn’t anything particularly obvious and I’m kind of drawing a blank?
Cheers in advance
Last edited: