there not that many commands -
10 Init ('0'/'1')
20 get status?
33 read card data ('016') / load card ('216')
40 cancel last command?
53 write data
78 print parameters ??
7A printer init ??
7C print text/pix
80 eject card
A0 cleaning
B0 get card from dispenser
C1 ??? seems not used,
D0 open/close front door (shutter) ('0'/'1')
'CRC' is simple bytes XOR, starting from LEN, ending 'END DATA' (included)
10 Init ('0'/'1')
20 get status?
33 read card data ('016') / load card ('216')
40 cancel last command?
53 write data
78 print parameters ??
7A printer init ??
7C print text/pix
80 eject card
A0 cleaning
B0 get card from dispenser
C1 ??? seems not used,
D0 open/close front door (shutter) ('0'/'1')
'CRC' is simple bytes XOR, starting from LEN, ending 'END DATA' (included)
Last edited: