Progress!
Fixed a couple sketchy solder joints and now we attempt to power on. You can hear it try to give HV to the tube 3-4 times, then shutdown and tick until shut off (not HOT ticking sound). B+ is reading 24v so that's definitely not right. But it's better than 0v.
Fixed a couple sketchy solder joints and now we attempt to power on. You can hear it try to give HV to the tube 3-4 times, then shutdown and tick until shut off (not HOT ticking sound). B+ is reading 24v so that's definitely not right. But it's better than 0v.