L Layer33 Student Joined Jul 22, 2017 Messages 119 Reaction score 83 Jul 10, 2020 #1 Hello all I'd like to know if someone uses or knows the pinout of this Nesica RFID card reader model (K92X0331B with HJST 5/6 pins N1 connector and HJST 5 pins N2 connector) ? Thanx.
Hello all I'd like to know if someone uses or knows the pinout of this Nesica RFID card reader model (K92X0331B with HJST 5/6 pins N1 connector and HJST 5 pins N2 connector) ? Thanx.
L Layer33 Student Joined Jul 22, 2017 Messages 119 Reaction score 83 Jul 11, 2020 #2 Are these pinouts correct ? N1 PIN 1 +5V PIN 2 TX PIN 3 RX PIN 4 GND PIN 5 FGND N2 PIN 1 +5V PIN 2 NESICA LED -RED- PIN 3 NESICA LED -GREEN- PIN 4 NESICA LED -BLUE- PIN 5 GND Click to expand... Do I have to use N1 only with a TX3 mobo ?
Are these pinouts correct ? N1 PIN 1 +5V PIN 2 TX PIN 3 RX PIN 4 GND PIN 5 FGND N2 PIN 1 +5V PIN 2 NESICA LED -RED- PIN 3 NESICA LED -GREEN- PIN 4 NESICA LED -BLUE- PIN 5 GND Click to expand... Do I have to use N1 only with a TX3 mobo ?
corey Professional Joined Jan 20, 2016 Messages 613 Reaction score 446 Location Victoria, Australia Jul 12, 2020 #3 these are serial based RFID card readers and run off the USIO in a TTX4 or FF Dissidia. Other Card readers are JVS based and come with a USB header
these are serial based RFID card readers and run off the USIO in a TTX4 or FF Dissidia. Other Card readers are JVS based and come with a USB header