Hello,
My darksoft doesn't load games, at any game the ST-V says "error" and loops on the ST-V logo with the little music. With an official game like Tecmo World cup 98 & Decathlete it works.
I did several tests with my Darksoft as recommended, here is the list of things I did:
- I soldered the 2 SH2 (even if I had already done it 1 year ago)
- I changed my SD card by one, sandisk 16GO SD HC, I checked at the beginning without formatting it that it was in FAT32, it did not work, so I formatted it with a long formatting and with the software SD formater. I had a SD card of the same brand in SD HC but 32GB.
- I tested with and without the multi selector
- In the attachment of my message you will see the picture of my installation, everything is connected as per the manual
- I checked all the connections with a continuity test
No matter what I do Darksoft always does the same thing, I select a game (with the multi selector or the jumper directly) it loads the game because I see the second green LED light up. During this time the screen is black or it puts me directly "error press test". As soon as the green LED goes out I press the "reset" button on the ST-V card and I see the bios being launched with the continents "Europe, USA, Hong Kong" and then with numbers and directly the SEGA logo in error.I would also like to point out that I never have a "loading" or "end loading" sound when I load a game because the sound of my ST-V works and the thread is soldered in the right place
The only thing I don't have compared to many is a multibios (which I ordered it should arrive this week).
At the end of the week a friend is coming with another official game and a ST-V multi game card but no Darksoft to test. But according to me my DarkSoft card has a problem...
Knowing that I only plugged it in last week, even if I received it 1 year ago because it was a gift from my wife but I couldn't play it before and it was kept in its transport bubble with the transport box well closed in a dry place and not in a wet place.
Would you have a solution or a clue, I confess to having tested everything that has been said on this forum...