problem with pandora 3

[keydo]

hey guys

I'm working on a project so that I can raise money for kids in order they can start planting organic and eating healthy

is there any way I can use 6 buttons on Pandora 3 jamma board and is there any jamma board that supports 6 buttons

and if I used kick harness adaptor on Pandora 3 would it help

thank

 

[crans]

If your jamma is fully populated then your good to go. Chances are many of the lines in your existing harness are ground or missing lines for p1/2 D, E, F, for this odd jamma config. If ground make sure to snip them

Jnx makes an adapter for blue elf and Pandora with a kick.

For my junky Pandora setups I tap the lines directly on the pcb and make my own kick harness. The manual has the pinout

 

[crans]

keydo I saw your email and lost it. but really it's a waste to get the adapter. Just open she'll solder in jumpers to a molex and boom your done on the cheap.