I was wondering if anyone might be able to help me locate a missing part for a B board. I think it’s a generic part, just one of the white pin connectors that sits on top of the board, and to which you connect a multi kit. I’ve circled the spot of the missing part in red in the picture below, and circled the same part that wasn’t removed in blue.
The board when I acquired it (as a throw-in with an A board that has since been consolized) was a Progear conversion on a rev 7 board. At some point, whoever did the conversion likely removed the connector as I guess it wasn’t needed for Progear given there is nothing attached there. My intention was to install a multi kit, but without the white connector, that wasn’t possible. So now I’m hoping to revisit.
Any thoughts on where I might acquire this missing part?
The board when I acquired it (as a throw-in with an A board that has since been consolized) was a Progear conversion on a rev 7 board. At some point, whoever did the conversion likely removed the connector as I guess it wasn’t needed for Progear given there is nothing attached there. My intention was to install a multi kit, but without the white connector, that wasn’t possible. So now I’m hoping to revisit.
Any thoughts on where I might acquire this missing part?