Casselfornia
Student
Hi,
I recently acquired this board with Dynamite Deka. Previous Owner already resoldered the sh2 chips. The system passes all checks when I press the test button while powering up.
Problem is that it doesn't boot. No animation, no nothing. With or without cartridge, just a black screen. Any idea what could possibly cause this?
Cap c62 also seems to have blown one day. It's definitely dead. And I found that something is weird with r100. It seems there is an transistor soldered to the two pads where a resistor should be. Can any of those cause the system to not boot?
The LED lights up of course.
I recently acquired this board with Dynamite Deka. Previous Owner already resoldered the sh2 chips. The system passes all checks when I press the test button while powering up.
Problem is that it doesn't boot. No animation, no nothing. With or without cartridge, just a black screen. Any idea what could possibly cause this?
Cap c62 also seems to have blown one day. It's definitely dead. And I found that something is weird with r100. It seems there is an transistor soldered to the two pads where a resistor should be. Can any of those cause the system to not boot?
The LED lights up of course.