What's new
By:
Filters

Sega X Board connector pinouts

TulioAdriano

TulioAdriano

Student
Joined
Jun 3, 2022
Messages
58
Reaction score
61
Location
United States
I recently came across a Sega X Board (GP Rider), however it's board only. I'd like to convert that board but that's a topic for later.

Right now, I just want to power on the board and verify that it is working. However I do not have a filter board, and I can't seem to find one anywhere. I'd like to build a wiring harness to connect it to a supergun. Is there anything like that already available?

I'm currently digging through After Burner's schematics, but if anyone has a good description of the connectors, or a JAMMA solution for that board it would be greatly appreciated. 🙏
 
check this thread https://www.arcade-projects.com/threads/sega-after-burner-jamma-modification.13528/

and from that I made this but I'm afraid it will make you more confused ! hell I don't even understand it anymore ! :D

afpin.jpg
 
It's a great start.

I also found this on one of the manuals, which helps
1691441631799.png


Having some of the IO work will help too. I'm thinking once I get it all figured out, I can probably create an adapter for common double analog joysticks like Xbox, PlayStation, etc. :)
 
ImportantBet said:
@Mrhide May I get the digikey part # for those AMP20/50 connectors?
Click to expand...

They are not AMP but Molex ... it's what I could find at the time

The 10 pins
https://www.digikey.ca/en/products/detail/molex/0901430010/760774
the 20 pins
https://www.digikey.ca/en/products/detail/molex/0901430020/760779
The 60 pins one
https://www.digikey.ca/en/products/detail/molex/0901430060/760785

the pins
https://www.digikey.ca/en/products/detail/molex/0901192109/760712

They don't lock and don't have "a way" so you'll wonder which way to put it back if you take them out and haven't identified it some way or another
 
You must log in or register to reply here.
Back
Top