While back bought the TypeX2 MultiHDD from Darksoft (which works great!)
However; when hooking it up to my old Sony Bravia 42" (regular 1080p HDTV) with a DVI -> HDMI cable, the following is happing:
- At bootup the TV switches to 1080p
- I see for 0.5 second the white/blue letters bootup screen in nice highress quality
- The TV switches to 480p
- I see the white/blue letters bootup screen again, but clearly in 480p
After that all the games are happily working in 480p .
DIPswitch #2 is set to ON (you can't miss ON, as it is written above the dips).
DIPswitch #1 is also set to ON, the rest is OFF. But I cannot find anywhere if/what these dips do (except #4).
I got the Taito TX2 out of a Vewlix, in which I tested the just received HDD. Which worked as expected on 720p.
What I am missing?
However; when hooking it up to my old Sony Bravia 42" (regular 1080p HDTV) with a DVI -> HDMI cable, the following is happing:
- At bootup the TV switches to 1080p
- I see for 0.5 second the white/blue letters bootup screen in nice highress quality
- The TV switches to 480p
- I see the white/blue letters bootup screen again, but clearly in 480p
After that all the games are happily working in 480p .
DIPswitch #2 is set to ON (you can't miss ON, as it is written above the dips).
DIPswitch #1 is also set to ON, the rest is OFF. But I cannot find anywhere if/what these dips do (except #4).
I got the Taito TX2 out of a Vewlix, in which I tested the just received HDD. Which worked as expected on 720p.
What I am missing?