mltv
Professional
Hey folks,
I got in a spare TTX2. With the 12v power connected (4pin molex connector), the TTX2 doesnt power on. With the 12v disconnected it powers on (fans spin, etc.). I dont get video (onboard or the video card) in either case, though.
I already swapped out the below with known working replacements:
Power supply
RAM
And I tried booting with and without the video card, and also with and without the JVS card connected to the motherboard.
But the same thing happens: with 12v connected, no power on/no video. With 12v disconnected it powers on/no video.
I intend on swapping out the video card from a working TTX2 (but I cant even get onboard video, so I dont think this would do anything).
Does anyone have any pointers? The last thing I can swap out would be the CPU.
I got in a spare TTX2. With the 12v power connected (4pin molex connector), the TTX2 doesnt power on. With the 12v disconnected it powers on (fans spin, etc.). I dont get video (onboard or the video card) in either case, though.
I already swapped out the below with known working replacements:
Power supply
RAM
And I tried booting with and without the video card, and also with and without the JVS card connected to the motherboard.
But the same thing happens: with 12v connected, no power on/no video. With 12v disconnected it powers on/no video.
I intend on swapping out the video card from a working TTX2 (but I cant even get onboard video, so I dont think this would do anything).
Does anyone have any pointers? The last thing I can swap out would be the CPU.