Hi all. I’m new to arcades. I bought a super gun on AliExpress. Yes I know some people say they are junk, but I have their NeoGeo box and it works great. So I took the plunge, bought their Jamma Cbox and a CPS 2 A and B board set.
I have the super gun connected via component to a Retrotink which converts it to HD, then to a scan line generator and into my HD tv. It works fine, Sound and controls work. I even got the kick harness working. However, occasionally my tv will lose a signal for a few seconds. When the picture and sound comes back the game is still going. So the board isn’t resetting.
Is this a board issue? A Cbox issue? A power issue? Any idea what the culprit may be?
I’ll add that I removed the retotink and plugged component directly into the tv. The picture looks terrible, but I didn’t notice any loss of picture unless I moved the dials on the Cbox adjusting the picture. Is it there isn’t enough voltage running to the CPS2 and into the tink?
Thanks,
Jim
I have the super gun connected via component to a Retrotink which converts it to HD, then to a scan line generator and into my HD tv. It works fine, Sound and controls work. I even got the kick harness working. However, occasionally my tv will lose a signal for a few seconds. When the picture and sound comes back the game is still going. So the board isn’t resetting.
Is this a board issue? A Cbox issue? A power issue? Any idea what the culprit may be?
I’ll add that I removed the retotink and plugged component directly into the tv. The picture looks terrible, but I didn’t notice any loss of picture unless I moved the dials on the Cbox adjusting the picture. Is it there isn’t enough voltage running to the CPS2 and into the tink?
Thanks,
Jim