C Cat Student Joined Oct 2, 2018 Messages 73 Reaction score 16 Location Singapore Oct 31, 2019 #1 This Last JPEG Picture of a Wiring Connector is what I am looking for The Wires must be around 12cm in Length The Wiring "Must" Fit the Pins of the Hori Hayabusa Silent Buttons Thanks
This Last JPEG Picture of a Wiring Connector is what I am looking for The Wires must be around 12cm in Length The Wiring "Must" Fit the Pins of the Hori Hayabusa Silent Buttons Thanks
stj Grand Master Joined May 4, 2017 Messages 1,721 Reaction score 882 Location England Nov 2, 2019 #2 make them. the white plug is JST, not sure the range from that picture, the other end are small crimp spade terminals.
make them. the white plug is JST, not sure the range from that picture, the other end are small crimp spade terminals.
JoeAwesome Professional Joined Feb 28, 2019 Messages 635 Reaction score 400 Location BCS/Houston, Texas Nov 2, 2019 #3 I’ve seen these cables in this size for the zero delay usb board. If you need them in a specific size though, it’s make or pay someone to make most likely.
I’ve seen these cables in this size for the zero delay usb board. If you need them in a specific size though, it’s make or pay someone to make most likely.
X xodaraP Legendary Joined Sep 21, 2016 Messages 4,751 Reaction score 3,794 Location Gold Coast, Australia Nov 3, 2019 #4 The pins are 2.8mm (0.110" in freedom units) quick disconnects. Very easy to get. If you want official Sanwa you can get them from Akishop. If no one else closer to you can make the harness up I'm happy to order the parts and make one for you
The pins are 2.8mm (0.110" in freedom units) quick disconnects. Very easy to get. If you want official Sanwa you can get them from Akishop. If no one else closer to you can make the harness up I'm happy to order the parts and make one for you