SNK-NEO-GEO
Enlightened
Cross posting from shmups
https://shmups.system11.org/viewtopic.php?f=6&t=56155&p=1387754#p1387754
Hello guys.. complete newbie to mod.. Syntax helped me with the newbie questions over PM...
I am looking to RGB MOD my Pelco monitors.. Bellow are pictures of one of the units chassis and the one that i will be using for testing (the screen has a scratch, F-up during shipping on this one).. I would like to use SCART on the monitors.. Please take a look at the pictures and let me know what is the best to go about it...If rising the legs on the RGB-in line on the jungle chip is best or somewhere else..
also -
Please recommend a link to buy wires, resistors and caps and scart pin head connector etc..
Pelco PMC21A TDA8842 S1
https://drive.google.com/drive/folders/ ... IzzBQ1kdBq
"All you need is 75R resistors and 100n caps and your done.
3 wires RGBS with resistors to ground and caps inline
1 wire blanking with resistor to ground
1 wire sync
2 wires audio
1 wire ground. "
parts -
This one takes 4ever to get so order this in advance if going Scart
https://www.ebay.com/itm/2-Pcs-Dual...437453&hash=item4ac0d41a05:g:yEAAAOSwnbtdgi9Q
cables
https://www.amazon.com/gp/product/B01EV70C78/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
more cables
https://www.amazon.com/gp/product/B07GFW6ZB3/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1
switches
https://www.amazon.com/gp/product/B07XMH174C/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Resistor
https://www.amazon.com/gp/product/B07HDFSC6B/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
caps..
https://www.amazon.com/gp/product/B07X5XTDPB/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1
discard stick
https://www.amazon.com/gp/product/B07HPCMFNV/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Glove
https://www.amazon.com/gp/product/B07LDDDGHB/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
https://shmups.system11.org/viewtopic.php?f=6&t=56155&p=1387754#p1387754
Hello guys.. complete newbie to mod.. Syntax helped me with the newbie questions over PM...
I am looking to RGB MOD my Pelco monitors.. Bellow are pictures of one of the units chassis and the one that i will be using for testing (the screen has a scratch, F-up during shipping on this one).. I would like to use SCART on the monitors.. Please take a look at the pictures and let me know what is the best to go about it...If rising the legs on the RGB-in line on the jungle chip is best or somewhere else..
also -
Please recommend a link to buy wires, resistors and caps and scart pin head connector etc..
Pelco PMC21A TDA8842 S1
https://drive.google.com/drive/folders/ ... IzzBQ1kdBq
"All you need is 75R resistors and 100n caps and your done.
3 wires RGBS with resistors to ground and caps inline
1 wire blanking with resistor to ground
1 wire sync
2 wires audio
1 wire ground. "
parts -
This one takes 4ever to get so order this in advance if going Scart
https://www.ebay.com/itm/2-Pcs-Dual...437453&hash=item4ac0d41a05:g:yEAAAOSwnbtdgi9Q
cables
https://www.amazon.com/gp/product/B01EV70C78/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
more cables
https://www.amazon.com/gp/product/B07GFW6ZB3/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1
switches
https://www.amazon.com/gp/product/B07XMH174C/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Resistor
https://www.amazon.com/gp/product/B07HDFSC6B/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
caps..
https://www.amazon.com/gp/product/B07X5XTDPB/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1
discard stick
https://www.amazon.com/gp/product/B07HPCMFNV/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Glove
https://www.amazon.com/gp/product/B07LDDDGHB/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Last edited: