Hey all, got a Vewlix F in last week, and I've finally been able to properly play around with an X2 multi I got a while back. Some weird stuff going on, though. The basic issues:
- Akai Katana (the game I bought the X2 to play), displays in a weird stretched(?) 640 x 480 resolution. This also seems to require patches to be on in the settings menu. Earlier tonight while testing, with dip switch 2 on, it seems the game would load, but no video would display. For whatever reason, it seems to display video now with dipswitch 2 on, but still getting the described messed up resolution.
- The multi menu doesn't seem to fit on the screen. 3D Cosplay Mahjong (the other game I bought this to play) is cut off when the menu loads.
Every game I've tested other than Akai Katana works fine with no resolution issues. Is there something you have to do to clear out dipswitch settings after changing them? I've never heard of anything like that, but I'm at a loss.
Setup info:
Connected to Vewlix monitor via DVI cable
Model 208A
CPU P4 3.4Ghz
Sticker on the case says 4GB of ram (though it sounds like these can really only do 3GB?)
Unsure of specifics outside of these, let me know if any other info is required.
Got this X2 off of this forum, so I know it's good to go, and I'm probably just missing something. Any info is very, very much appreciated. Thanks all.
- Akai Katana (the game I bought the X2 to play), displays in a weird stretched(?) 640 x 480 resolution. This also seems to require patches to be on in the settings menu. Earlier tonight while testing, with dip switch 2 on, it seems the game would load, but no video would display. For whatever reason, it seems to display video now with dipswitch 2 on, but still getting the described messed up resolution.
- The multi menu doesn't seem to fit on the screen. 3D Cosplay Mahjong (the other game I bought this to play) is cut off when the menu loads.
Every game I've tested other than Akai Katana works fine with no resolution issues. Is there something you have to do to clear out dipswitch settings after changing them? I've never heard of anything like that, but I'm at a loss.
Setup info:
Connected to Vewlix monitor via DVI cable
Model 208A
CPU P4 3.4Ghz
Sticker on the case says 4GB of ram (though it sounds like these can really only do 3GB?)
Unsure of specifics outside of these, let me know if any other info is required.
Got this X2 off of this forum, so I know it's good to go, and I'm probably just missing something. Any info is very, very much appreciated. Thanks all.