Hello I have two games running decrypted code. First is Marvel super heroes running on Rev 4 board with f pal. Second is Street fighter alpha on Rev 6 board with e pal. Should be no problem swapping around all roms and pal from one board to the next? so running sfa on rev 4 with e pal and MSH on Rev 6 with f pal. no other mod needed correct? thanks
- Thread starter brad808
- Start date
Jumpers would probably need to be adjusted.
And rev4 might need a jumper wire installed running from the pal to CN1. They did those at the factory on some, but it might only be for a G pal... not gonna get into detail on that because I am not certain, but you can google around and see people connecting to CN1 pin 13 from the PAL.
But if they’re both working, why would you swap them?!
And rev4 might need a jumper wire installed running from the pal to CN1. They did those at the factory on some, but it might only be for a G pal... not gonna get into detail on that because I am not certain, but you can google around and see people connecting to CN1 pin 13 from the PAL.
But if they’re both working, why would you swap them?!
YesAffinity
Enthusiast
There's 2 different jumper mods - 1 for pal f and 1 for pal g. Make sure you're looking at the right one, for pal f.
