@dash3296
Sorry for bad English
View: https://www.youtube.com/watch?v=hyain9ofRLQ&t=684s&ab_channel=TaikoZhong
I'm now controlling the 26-pin taiko signals using arduino,
my taiko controller connects to an e-box which outputs DFJK to my PC, and my Visual Basic program received DFJK, use SerialPort to communicate with Arduino,
then Arduino just simply do digitialWrite(pin, high) and low.
I think it's possible for an arduino read sensors Tatacon's using, then you won't have to worry about tatacon ic or something,
i'm not quite sure how will the sensors work, it should be just low and high voltage, and make sure you have right mapping since I don't know what will happen if mapping's wrong.
DC Invitation (to check my program in message below):
https://discord.gg/HFm37aA5zr
Program pinned in Discord message:
https://discord.com/channels/859872100860035113/859878630422609972/919327614722789436
PS: To your last message about 1012, since on AC, sensors io will output from 0v to 0.5v to jvs io, 1000 = 5v, 100 = 0.5v, 20 = 0.1v
but it's pointless since there's no sensitivity about tatacon right?
and if anyone's interested talking with me, here's my DC
乾一盅#3417