What's new
By:

Gundam 4p

I can't believe what those IOs are going for with cables. I used to practically give them away. No regrets.
 
Right, who wants to volunteer to make me 3 sets of cables? Who wants money?

I just need the ribbon cables and the power.
 
The ribbon cables should be easy enough to source from eBay / Aliexpress. I'll look them up if I remember to.
 
Ok the cables are coming... one day. Now onto the power cables, does anyone have any info on them? Or want to build me some?
 
Project Update:

Everything seems to be working so far. I've got my 256 running and I have been mucking around with the USB Dongle :D

Two things left to sort out:
  1. I can't seem to find the power adapter that goes from the Capcom IO to the System 2x6. Any help would be appreciated.
  2. I need some kick harnesses for the namco jamma interface boards that use a JST connector, preferably a simple conversion from CPS2. Again, any help would be appreciated.
 
plasia said:
  1. I can't seem to find the power adapter that goes from the Capcom IO to the System 2x6. Any help would be appreciated.
Click to expand...
Personally I'd stay away from using the Cap I/O power and wire the 2x6 directly to the cab's power or even just run a separate PSU. I've had issues with 2x6 and Naomi's not getting enough power from it. As for a cable, I think you'd need the JVS Namco power adaptor, then get a male-male JVS power cord.
 
majors said:
plasia said:
  1. I can't seem to find the power adapter that goes from the Capcom IO to the System 2x6. Any help would be appreciated.
Click to expand...
Personally I'd stay away from using the Cap I/O power and wire the 2x6 directly to the cab's power or even just run a separate PSU. I've had issues with 2x6 and Naomi's not getting enough power from it. As for a cable, I think you'd need the JVS Namco power adaptor, then get a male-male JVS power cord.
Click to expand...
Thanks, I can find the cable you linked a picture of, but not the male/male JVS one :(

Does anyone make an ATX to Sys2x6? Can I combo with ATX to Naomi and one of those cables you linked? I can't quite tell if it's male or female.

skate323k137 said:
plasia said:
skate323k137 said:
Which ones? I find the 256 JVS power connectors easily just not the jamma IO ones.
Click to expand...
I'd like to power from Capcom IO. So Capcom IO -> System 2x6
Click to expand...
I know. I have done this with the way I said above. Need pictures?
Click to expand...
Links where to get is what I need. Although what @majors wrote gives me pause.
 
You must log in or register to reply here.
Back
Top