Hello people,
I started a new interesting project.
1- Dreamcast Custom case.
The case almost finish. There will be 2 different version. Metal and Wood. I wanna prepare a whole packet which people can install their Dreamcast into my custom shell easily. The pre-alpha prototype is ready for now, but I cannot share the pictures. I will release it when I finish the prototype which It will be ready in 1 week.
Please check the design.
. 26x20x5,5 CM Dimesions
.It will compatible with GDEMU and USB GDROM.
. Power will replace with Pico ATX 12V small power.
. No GD Drive sorry.
. SD card input hole
. Disc Swap switch
.HDMI Output port ( Next Future. Waiting for DCHDMI )
. Push power button with LED.
. 2 different LOGO version. The logo with BLUE and ORANGE light. And The logo by metal BLUE and ORANGE. People can choose anyone.
2- CPS-3 Custom Shell Wood and Metal.
Hello people,
The project is finish. I open a preorder. The price is limited time only for the pre-order. After first 20 Unit it will be higher sorry
.
Price : 125 USD + Shipping + Paypal FEE ( PLEASE ASK SHIPPING COST )
I will put on my website that you can buy it directly.
I can understand if the price is high to you, but please think about this; all of the parts are metal and there is too much work by hand, molding and polishing. Especially for the corner, i build some molds and take my time very much.
I will collect the pre-order then i will produce it. I choose this method because i don't wanna waste my time. I have to make time for the other projects. All of the cases will be ready in 2 Weeks, after reach to 20 Unit.
What's include :
- Metal CPS3 Case
- Aluminium sticker with the Serial Number.
- Supports for SCSI2SD PCB ( 2 different PCB )
- Anti slip feet.
- Metal parts which can be use to attach on the wood inside the cabinets
- Metallic Car Paint for all metal parts
- Screws to attach PCB's on the metal floor.
- You can use your CD-DRIVE outside the CASE
- Plexiglass and 12V LEDs under the logo. You have to take 12V from your power. You can unplug it if you don't want to use it. There is 2pin socket between LED and cable.
- Plastic Test button. It is working manual. You can take it off if you don't want to use it. There is only one plastic O-Ring inside the metal.
- Plastic Sound Button. Please put the button after you close the metal boxes. It will fit on the Sound port and you can swivel. Please make it Turn Gently. You can take it off if you don't want to use it. There is only one plastic O-Ring inside the metal.
Please check the pictures and share with me your feedbacks.
This is the list who paid and interest:
1- @tiff_lee (paid 1pc )
2- @Derick2k (paid 3pc)
3- @BlinG (paid 1pc)
4- @opt2not (paid 1pc)
5- @tom5151 (paid 1pc)
6- @KalessinDB (paid 1pc)
7- Loegan43 ( paid 1pc KLOV)
8- @deibit ( paid 1pc )
9- @FairWitness (paid 1pc)
10- @kuze (paid 1pc )
11- @ChuChu Flamingo (paid 1pc)
12- Chibishin (paid 1pc Arcade-otaku)
PLEASE CLICK HERE TO BUY
I started a new interesting project.
1- Dreamcast Custom case.
The case almost finish. There will be 2 different version. Metal and Wood. I wanna prepare a whole packet which people can install their Dreamcast into my custom shell easily. The pre-alpha prototype is ready for now, but I cannot share the pictures. I will release it when I finish the prototype which It will be ready in 1 week.
Please check the design.
. 26x20x5,5 CM Dimesions
.It will compatible with GDEMU and USB GDROM.
. Power will replace with Pico ATX 12V small power.
. No GD Drive sorry.
. SD card input hole
. Disc Swap switch
.HDMI Output port ( Next Future. Waiting for DCHDMI )
. Push power button with LED.
. 2 different LOGO version. The logo with BLUE and ORANGE light. And The logo by metal BLUE and ORANGE. People can choose anyone.
2- CPS-3 Custom Shell Wood and Metal.
Hello people,
The project is finish. I open a preorder. The price is limited time only for the pre-order. After first 20 Unit it will be higher sorry
.Price : 125 USD + Shipping + Paypal FEE ( PLEASE ASK SHIPPING COST )
I will put on my website that you can buy it directly.
I can understand if the price is high to you, but please think about this; all of the parts are metal and there is too much work by hand, molding and polishing. Especially for the corner, i build some molds and take my time very much.
I will collect the pre-order then i will produce it. I choose this method because i don't wanna waste my time. I have to make time for the other projects. All of the cases will be ready in 2 Weeks, after reach to 20 Unit.
What's include :
- Metal CPS3 Case
- Aluminium sticker with the Serial Number.
- Supports for SCSI2SD PCB ( 2 different PCB )
- Anti slip feet.
- Metal parts which can be use to attach on the wood inside the cabinets
- Metallic Car Paint for all metal parts
- Screws to attach PCB's on the metal floor.
- You can use your CD-DRIVE outside the CASE
- Plexiglass and 12V LEDs under the logo. You have to take 12V from your power. You can unplug it if you don't want to use it. There is 2pin socket between LED and cable.
- Plastic Test button. It is working manual. You can take it off if you don't want to use it. There is only one plastic O-Ring inside the metal.
- Plastic Sound Button. Please put the button after you close the metal boxes. It will fit on the Sound port and you can swivel. Please make it Turn Gently. You can take it off if you don't want to use it. There is only one plastic O-Ring inside the metal.
Please check the pictures and share with me your feedbacks.
This is the list who paid and interest:
1- @tiff_lee (paid 1pc )
2- @Derick2k (paid 3pc)
3- @BlinG (paid 1pc)
4- @opt2not (paid 1pc)
5- @tom5151 (paid 1pc)
6- @KalessinDB (paid 1pc)
7- Loegan43 ( paid 1pc KLOV)
8- @deibit ( paid 1pc )
9- @FairWitness (paid 1pc)
10- @kuze (paid 1pc )
11- @ChuChu Flamingo (paid 1pc)
12- Chibishin (paid 1pc Arcade-otaku)
PLEASE CLICK HERE TO BUY
Last edited:
