I'm trying to link two JVS cabs but can't get them to work properly. It's a pair of HD cabs that came paired and already have all wiring. Hooking everything up, the 2p works as 1p, and 1p doesn't work at all. Hooked up separately like normal, both work.
Here's the JVS routing: TypeX2 JVS goes into the vs. kit passthrough. Output from that goes to the 1p JVS IO. The other port on that goes out to the 2p JVS IO. This produces the problem above. I've tried bypassing the vs kit as well. Any suggestions? It's on the show floor and I'd e been rushing with other things, not sure what else to try right away.
Here's the JVS routing: TypeX2 JVS goes into the vs. kit passthrough. Output from that goes to the 1p JVS IO. The other port on that goes out to the 2p JVS IO. This produces the problem above. I've tried bypassing the vs kit as well. Any suggestions? It's on the show floor and I'd e been rushing with other things, not sure what else to try right away.