Does B-board case fit over the CPS2 multikit with LCD cable attached?

[the Goat]

The instructions PDF say in order to get the lid to fit you need to remove one support post from the case lid. I removed the support post. But the lid still will not fit with the LCD ribbon cable plugged in. What is the deal?

 

[syntax_X]

Take the little top bit of plastic off the ribbon cable, mine was fouling by that couple of mm.

I super glued it together.

 

[the Goat]

Take the little top bit of plastic off the ribbon cable, mine was fouling by that couple of mm.

Thanks. That worked. My CPS2 is all buttoned now.