Need 2 Gal dumps: SF2 bootleg & kaneko

[Hammy]

Looking for 2 gal dumps to finish some repairs...

Kaneko SHOGUN warrior OR B. Rap boys U74 (16cV

Bootleg SF2 20v8a from under the processor (board pic below)

Cheers!

 

[Derick2k]

I gots a blood warrior i can check later if you need it.

 

[Hammy]

I gots a blood warrior i can check later if you need it.

Cool! It's prob not unlocked so may have to go to someone with a dumper/cracker if you don't have it.

Good it's a 16 so should be possible, it's the 18C's that are big trouble.

 

[Hammy]

Helps if i get things correct, it's the 1st one Shogun warrior needed. Not blood warrior Also it's an 18C

See too much it all mixes together in the brain haha.
Here is a pic anyway to make things easier...

 

[ekorz]

I have a Fujiyama busters. But i don’t know who can dump it... do you?

 

[Hammy]

Bootleg SF2 20v8a from under the processor (board pic below)

Attached if anyone else needs, Dump looks good and can add to jammarcade over the weekend.
Sadly board is still dead.

I have a Fujiyama busters. But i don’t know who can dump it... do you?

Not sure, chances are locked and registered. There's like 10% chance.
There is other ways of getting a dump but i know 18C's are the hardest.

 

[Derick2k]

Not sure, chances are locked and registered. There's like 10% chance.
There is other ways of getting a dump but i know 18C's are the hardest.

Any tools/adapters to do it?

 

[KevW24601]

Bootleg SF2 20v8a from under the processor (board pic below)

Attached if anyone else needs, Dump looks good and can add to jammarcade over the weekend.Sadly board is still dead.

Hm. So what's the situation in this case then? Is it dead completely?

 

[Hammy]

There's other problems with it, its exactly the same.

Any tools/adapters to do it?

I'm not sure, the stuff most people have is for Gal16 :/