Pics of the triforce, now tested working (but I’d throw a noctua in there if I were you) https://imgur.com/a/utL3q1U
Oh, mine is dead as well. Looking at the Mame driver, it's a 93C56. Did you just swap in a new one?Cleaned up the Strikers 1945iii / Strikers 1999. The eeprom was dead and the c1 cap was missing like usual, so I refitted both and cleaned it. Also enabled the secret ship because it’s the best!!
Pics/vid: imgur.com/a/Cj2effE
yes, and on first boot it will read NG since it’ll be blank, but on the next boot it will be written by the program. If not you can reset to factory in the test menu too.Oh, mine is dead as well. Looking at the Mame driver, it's a 93C56. Did you just swap in a new one?
trade yes... sell, not yet!sell Batsugun
The scaler is like any other scaler that takes 15khz to 31khz, but it’s made by Taito. It was part of their vewlix jamma kit. So to use it you still need some kind of jamma harness as well, like the official one or the one from a cyberlead. you run the video from there through this, and it scales and attenuates the jamma signal to be suitable for the lcd. It has a bunch of presets for various board types too, but I never used it since I sold my cyberlead io to a buddy.Remind this noob what the Taito scaler does?
@opt2not was looking for a G-Taste I believe.Selling stuff, starting with a G Taste. Unclear if the rework is factory or what but all the smd roms have flux on em. https://imgur.com/a/gdcZ4rY
$125 shipped usa
100% factory.Unclear if the rework is factory or what but all the smd roms have flux on em.