- Thread starter hursit
- Start date
Shoot over an individual photo of each if you don't mind! I'd like to ask that of everyone actually. I normally take a single photo of every cab that comes through for posterity's sake, I can't really do that with these since we aren't fully uncrating everything. That's your pleasure to have.
ItsBobDudes
Grand Master
Oh dang! These are starting to make their way to buyers? Can’t wait!
Here's your boy uncrating. Managed to cut my right index finger while doing it, but it's nothing compared to the hype levels I've been feeling all day.
Two of us cut ourselves decently unloading these too. I'm one of them because I work without gloves roflHere's your boy uncrating. Managed to cut my right index finger while doing it, but it's nothing compared to the hype levels I've been feeling all day.
Anyone here who has a yellow cute coming want to trade it for a pink? Gotta change one pink for one yellow. I know a number of people didn't have any choice but yellow initially. EDIT: swap complete, ty!
Last edited:
Here's your boy uncrating. Managed to cut my right index finger while doing it, but it's nothing compared to the hype levels I've been feeling all day.
Wow
It is an excellent feeling to see that a product manufactured in Turkey, reaches its owners after a long time.
Thanks to this FORUM members. I cant do it without you. Also, thank you so much for waiting patiently for so long and trusting me.
I got emotional now
I hope everybody will love it.
Lemony Vengeance
Champion
I helped @Ajax and @Fletcher with the pick up, drop off, and uncrating, and they look so incredible in person! You really knocked these out of the park, @hursit. What a really special and significant event to be able to participate in! Thank you so incredibly much!
I added all but the side art on mine and decided to take a cringy “Throne of Games” shot with the weekend’s scoops
I added all but the side art on mine and decided to take a cringy “Throne of Games” shot with the weekend’s scoops
Last edited:
Lemony Vengeance
Champion
As for side art placement/measurements, here’s some hard numbers.
They’re 289mm from the bottom, confirmed on both sides:
left side on mine looked like this:
right side was slightly off:
So, looks like there’s variance, unless someone can backup what I measured
They’re 289mm from the bottom, confirmed on both sides:
left side on mine looked like this:
right side was slightly off:
So, looks like there’s variance, unless someone can backup what I measured
Last edited:
Lemony Vengeance
Champion
for the Kickplate rubber, I spoke with hursit on this and he stated that after time he noticed that standard adhesive backing would degrade over time.
I looked online and found this on the Gorilla Glue site:
I'm going to grab some and give this a shot tomorrow. I'll let you all know how it turns out.
I looked online and found this on the Gorilla Glue site:
Code:
When gluing metal to rubber a cyanoacrylate based adhesive, like our Contact Adhesive, would be ideal,
as it provides a flexible, but incredibly strong bond. It also has the added benefit of drying very quickly.
Keep in mind that this bond is not water-proof though; if this is an issue, consider using our fast drying Contact Adhesive instead.I'm going to grab some and give this a shot tomorrow. I'll let you all know how it turns out.
PDF Fıile for the Wire Harness is ready. Please check the file and inform me if you dont understand any point.
I have added it to first post of the other TECH thread.
Wire MANUAL for MINI CUTE
I have added it to first post of the other TECH thread.
Wire MANUAL for MINI CUTE
animesuperj
Student
Excited to see these finally starting to get into people's hands. Congrats on @hursit and @Cereth for making this happen!
For those not able to pickup, any thoughts as to plan or timeline for shipping? I know Cereth is super busy, so whenever it happens, it happens. Just figured I'd throw out the question for now to get the ball rolling.
For those not able to pickup, any thoughts as to plan or timeline for shipping? I know Cereth is super busy, so whenever it happens, it happens. Just figured I'd throw out the question for now to get the ball rolling.
Good to ask, I was planning on getting contact out to everyone a week or two ago until the emergency with my company came up. I’ll reach out individually when it becomes necessary.
STI shipments start going out this Friday. This week and next week I’m filling the back of the STI truck until full. Not everything can go this week, just won’t fit. There’s 25 other cabs besides the cutes in the pipeline too. I shipped 20 or so last week even.
Bay Area truck is scheduled to go over the weekend. Only estimate is Sat/Sun, due to poor truck availability and reliance on someone else doing the delivery, I cannot give a more accurate estimate. I have contacted everyone on this delivery already.
SoCal delivery will immediately follow. This puts it at Mon-Wed. It’s not the best to be during the week, but it’s where circumstances led. I was originally going to run two drivers for SoCal/Bay so they could both go over a weekend, but my Bay driver can’t make it, so the SoCal driver has to do both. There might be a bit more flexibility here, as anything not dropped off can probably be held a short while, but don’t count on it.
Pacific Northwest delivery will happen next month. I don’t have a driver for this, and I can’t break out to do it myself until then. I need to stay and prep freight, tackle company issues, and do the first Colorado delivery.
Colorado delivery will be around Sept 1. Second sometime later in Sept.
STI shipments start going out this Friday. This week and next week I’m filling the back of the STI truck until full. Not everything can go this week, just won’t fit. There’s 25 other cabs besides the cutes in the pipeline too. I shipped 20 or so last week even.
Bay Area truck is scheduled to go over the weekend. Only estimate is Sat/Sun, due to poor truck availability and reliance on someone else doing the delivery, I cannot give a more accurate estimate. I have contacted everyone on this delivery already.
SoCal delivery will immediately follow. This puts it at Mon-Wed. It’s not the best to be during the week, but it’s where circumstances led. I was originally going to run two drivers for SoCal/Bay so they could both go over a weekend, but my Bay driver can’t make it, so the SoCal driver has to do both. There might be a bit more flexibility here, as anything not dropped off can probably be held a short while, but don’t count on it.
Pacific Northwest delivery will happen next month. I don’t have a driver for this, and I can’t break out to do it myself until then. I need to stay and prep freight, tackle company issues, and do the first Colorado delivery.
Colorado delivery will be around Sept 1. Second sometime later in Sept.
oh shit are you in the aquabats?
Lemony Vengeance
Champion
.Made some progress so I decided to take a few pictures. I still have to mount the monitors and finish the wiring, but I'm really happy with how these have turned out so far. I have to say I'm amazed at the craftsmanship that's gone into these – they are so well built. My only regret at this point is not buying more 
They do look gorgeous. Excellent job @hursit and @Cereth on making these a reality. I'll be waiting a bit for mine but I'm honored to have been a part of this. Thank you for giving all of us an amazing experience.Made some progress so I decided to take a few pictures. I still have to mount the monitors and finish the wiring, but I'm really happy with how these have turned out so far. I have to say I'm amazed at the craftsmanship that's gone into these – they are so well built. My only regret at this point is not buying more
