Vewlix amp audio jack part number

[Hadouken Arcade]

Hello,

Does anybody know the part number for this audio jack?

I have several amps that need a replacement. I tried to source the part a while ago but had no luck.

Worst case I'll just solder something... any direction is appreciated

 

[nem]

Not the answer you're looking for, but there's three on the VS link board. So if you have a VS board that you have no use for...

 

[Mrhide]

that looks a lot like a standard STEREO JACK 3.5MM?
one of these ?
https://www.digikey.ca/en/products/...IgTCBcDaIMoBUCiAlJB5ABAKQIIGEBpTABXwCEQBdAXyA

got a picture of the other side so we know how many legs there are?

 

[Hadouken Arcade]

Not the answer you're looking for, but there's three on the VS link board. So if you have a VS board that you have no use for...

I have like 6 boards to repair so I want to see if there is an option first.

got a picture of the other side so we know how many legs there are?

I did look up before but did not find anything close. The jack says Jalco. I think this is the connector manufacturer but didn't really lead to anywhere.

 

[Hadouken Arcade]

I think I found it.

http://t-tatsumi.com/wp/wp-content/uploads/2014/10/sj9.pdf
PN: YKB21-5352N
I compared some of the dimensions and they're a match so far.

The question is, where the hell do can I buy these?
https://www.connectorpeople.com/Connector/JALCO/Y/YKB21-5352
It's missing a N at the end but I'm willing to do a leap of faith. Will report back.

 

[Hadouken Arcade]

Bingo. Got the right part.

See this post