Nanao MS9 29 broken pot!!!!

[Ali710]

Hello guys,
Anything can be done about this broken pot? Replace? Or can be adjusted by any means?

I really need to adjust PARA , last adjustment to the monitor.

https://ibb.co/syS3vt5

 

[_rm_]

You can simply replace them, the value should be 3.3k or 6.8k if i'm not mistaken.
I've read you can use 5k, i think it's easier to find.

 

[Ali710]

Hello guys,
Anything can be done about this broken pot? Replace? Or can be adjusted by any means?

https://ibb.co/syS3vt5

You can simply replace them, the value should be 3.3k or 6.8k if i'm not mistaken.
I've read you can use 5k, i think it's easier to find.

You mean desolder and use from another chassis? I already got another chassis which lots of work

 

[dewmansnk]

Re-using an old pot might not be the best idea. They get corroded and less accurate over time, so while this might fix your issue in the short term, you might just be adding headaches later on.

 

[_rm_]

Re-using an old pot might not be the best idea. They get corroded and less accurate over time, so while this might fix your issue in the short term, you might just be adding headaches later on.

This. You better try to source a new replacement online.