NetDimm Network Settings?

[skate323k137]

Two of my four case threads are destroyed, I have two screws installed in the only holes that have any thread left.
I've actually been trying to find a cheap/dead Naomi I could use just for its case, but nothing ever pops up (eBay had a dead one for 85$ WTF).

Ah that's a bummer, but even 2 is better than nothing. An old trick I used to use is taking toothpicks and epoxy and dipping the toothpicks in the epoxy and insert one/them (as many as you can fit) into the stripped hole and cut them off flush. Then after it sets drill a proper hole just smaller than your screw

 

[stj]

you could drill out the hole and insert a threaded brass bushing.

i salvage bushings from anything i bin - specially laptops, although those are M2.5 so too small for Naomi use.

 

[skate323k137]

you could drill out the hole and insert a threaded brass bushing.

i salvage bushings from anything i bin - specially laptops, although those are M2.5 so too small for Naomi use.

Nice, that seems like a much more professional solution than mine.

For a DIMM you should want M3, as the screws for a DIMM should be:
3x M3 30mm Pan head
1x M3 70mm Pan head

for carts, 4x 30mm.

 

[M3RI064]

Nice, that seems like a much more professional solution than mine.

For a DIMM you should want M3, as the screws for a DIMM should be:
3x M3 30mm Pan head
1x M3 70mm Pan head

for carts, 4x 30mm.

skate! I may have just purchased a bios from you on eBay? haha. On the 31st.

 

[M3RI064]

The updated Bios I got resolved my issue.
Sorry guys, turns out the Bios I originally had was not the H and an old bios.

Thank you @skate323k137 for the fast shipping.

 

[M3RI064]

My Sega I/O rev A does not have a audio rca jacks. Gotta figure out how I'm going to get audio now.

 

[stj]

from the phono sockets on the naomi

 

[skate323k137]

The updated Bios I got resolved my issue.
Sorry guys, turns out the Bios I originally had was not the H and an old bios.

Thank you @skate323k137 for the fast shipping.

Glad to hear it!

 

[M3RI064]

from the phono sockets on the naomi

Yeeeaaah? I just don't have anywhere to plug the opposite end. Maybe I need an adapter or something for the Sega IO

 

[skate323k137]

Yeeeaaah? I just don't have anywhere to plug the opposite end. Maybe I need an adapter or something for the Sega IO

The Capcom IO has RCA in, and amplifies to the JAMMA edge. The sega JAMMA IO doesn't have a feature like this, so if you are in a purely JAMMA cabinet you'll have to figure out something else for sound. Perhaps a small amplifier for audio in from the NAOMI, hooked to the cabinets speaker.

 

[M3RI064]

The Capcom IO has RCA in, and amplifies to the JAMMA edge. The sega JAMMA IO doesn't have a feature like this, so if you are in a purely JAMMA cabinet you'll have to figure out something else for sound. Perhaps a small amplifier for audio in from the NAOMI, hooked to the cabinets speaker.

I'm currently in a Egret 3.

 

[skate323k137]

I'm currently in a Egret 3.

I believe there is a stereo amp for that cab, but I don't own one to tell you any more on that front. I'm sure someone who does will be along shortly

 

[M3RI064]

I hate to change the topic of this thread but Im also not sure If I should create another thread for this.

Would anybody be able to tell me what these are used for?

I know the power and kick harness but not sure about the others.

 

[skate323k137]

I hate to change the topic of this thread but Im also not sure If I should create another thread for this.

Would anybody be able to tell me what these are used for?

I know the power and kick harness but not sure about the others.

This may be a good read/next stop

https://www.arcade-projects.com/threads/taito-egret-ii-3-awsd-appreciation-owners-thread.8862/