What's new

SOLD Vewlix Diamond Blue w/Upgraded monitor and adjustable Taito bench!

Mark your items as sold

rewrite

Multi Boyz Litigator
Immortal
Multi Boyz
Joined
Nov 9, 2015
Messages
8,689
Reaction score
8,744
Location
SoCal
Vewlix Diamond (Blue) Package 2:

The good:

Taito JVS IO

Replacement fans throughout
Taito adjustable height bench
LG 32GN50T-B gaming monitor installed
Comes with both the original and one of those aftermarket blue acrylic covers with a volume knob and extra buttons.
Original Taito locks
https://photos.app.goo.gl/Vbis6xjWS8X8UvbC9

The Bad:


Ugly red buttons. I haven't replaced them because they work fine, but man they're funky looking on the blue.

$2500 in Riverside, CA as it is.
$3000 with JAMMA kit included.

Happy to ship using your shipper but it must be cash and carry equivalent on my end.


May consider splitting the bench and cab if both are spoken for.


Only current partial trade interests are:

Jasenscustoms Panzer 3 Fightstick (case only if possible, prefer violet or powder blue but will not be picky at this point)

HasLab Sentinel


SOLD:

Vewlix Diamond Blue package #1:

The good:

OG monitor still running strong.
FastIO
Basically new joysticks/buttons (this was my 2P cab in a linked setup, so very VERY low usage thanks to Covid)
Taito adjustable height bench (tiny tear on seat, would patch easy I just keep forgetting to pick up a leather patch
LG 32GN50T-B gaming monitor - I intended to put this in when the OG monitor dies, but it's been stubborn!
Comes with both the original and one of those aftermarket blue acrylic covers with a volume knob and extra buttons.

The Bad:

Nothing!

https://photos.app.goo.gl/a2E5UYcHxcxsi9ZF9

$3000 in Riverside, CA. Happy to ship using your shipper but it must be cash and carry equivalent on my end.



Megalo 410:

I keep holding onto this waiting to have more space, but it's probably not going to happen as soon as I'd like.

The good:

WILL fit through a standard doorway with a bit of work. Easy to break down.
Not hacked up (body or wiring), the entire cab is present unlike most of them!
Sideart is in great shape
Basically new (and NOT cheap) BenQ MW621ST modern short-throw projector w/mount.
Brand new Alberto control panel.
Has the original fresnel lens.

The things to do:

Needs joysticks (has buttons)!
Speakers could be replaced (meh quality OG speakers).
Either rebuild the current PSU or toss in your standard JAMMA switching one.
Play games.

https://photos.app.goo.gl/kUSEP8ajo2XqZL2y6

You'll need to also setup the projector again as I wouldn't trust moving it installed.
$2000 in Riverside, CA. Happy to ship using your shipper but it must be cash and carry equivalent on my end.


Sigma Table Project

Decent little cab in okay shape. Needs a thorough cleaning, looks like someone got cement? on the sides of the cab. It scrapes off fine, but I haven't been out there chiseling it all off.
Has an 18" tube and yoke in it, no chassis. Turns out you can use a K7000 with it no problem as long as you also install a K7000 yoke.
Needs a CP, they pop up on YAJ fairly regularly.
Outside of the CP/chassis, it's all there as far as I can tell.

$400 - Same story re: shipping. If you want to poach the 18" tube/yoke out of it, that's your business, but the whole thing has to go, so please don't ask to buy it separately for your Cute or Red Tent.
 
Last edited:
I'm sorry the megalo project never fully panned out....but I certainly understand!!

I hope the new owner will have the space to give it the love it deserves!
 
I'm sorry the megalo project never fully panned out....but I certainly understand!!

I hope the new owner will have the space to give it the love it deserves!
You and me both, man. You and me both.

It's in a much better place than when I got it from you, but even if I finished the last couple of things I don't have a place to actually *play* it. :(
 
Interested in the table, I’ll send a pm after work if it’s still up for grabs!
 
Up we go. Yanked the Megalo out of storage and put it on a side of my office to muck around with and get pics.

https://photos.app.goo.gl/kUSEP8ajo2XqZL2y6

Will add a few of the projector running a little later today. Need to hunt down a VGA cable.
 
so tempting im in anaheim. if i had 3k id get the viewlix in a heartbeat but i sank all my cash into my blast city. do you have cabs for sale often? I need to grow a local arcade network of cool peeps in so cal.
 
That Megalo is so cool. Nice shape too.
It's a blast. Nothing quite like it.

so tempting im in anaheim. if i had 3k id get the viewlix in a heartbeat but i sank all my cash into my blast city. do you have cabs for sale often? I need to grow a local arcade network of cool peeps in so cal.
Often this year, but not in general. Downsizing a good bit and keeping just what gets used on the regular. I was upward of 2 dozen cabs so it was definitely time to trim.
 
I’m in Torrance.
Would love the Megalo, but I’m not sure how my wife would react to it.
That’s the only problem with this hobby…. Lack of space. GLWS
 
Last edited:
Megalo is sooolllldddd.

Tossed up some pics I'd had laying around of the Vewlix (especially how nice the OG screen is in this). When some interested parties show up I'll dig it out and spin it around and get some better pics, but these should suffice until then!

https://photos.app.goo.gl/mL8fRqT4euQacrov5
 
Back
Top