Long story short while doing some research I've learned the CP LED is 24 V and the top LED is 12V, well I got a tekken 7 cab with LEDs for the top but they weren't plugged in found this to be odd so I plugged them into where they needed to go. Low and behold I smelt burning from the connector quickly took it off it was the LED board burning up. Confused I did some more research and got a multimeter whoa it's giving off 120 volts, older machines use fluorescent bulbs which explains the 120V and explains why the LED board wasn't plugged in (the cord was wrapped around itself)
Big oof...I'm hoping someone can show me where the top LED board gets plugged in and I'll cross my fingers it's OK. If not second question anyone know where I can get Both LED boards for the CP and top? (My CP LED boards are bad as well for other reasons)
Big oof...I'm hoping someone can show me where the top LED board gets plugged in and I'll cross my fingers it's OK. If not second question anyone know where I can get Both LED boards for the CP and top? (My CP LED boards are bad as well for other reasons)