Need a Dangerous Curves (or other Taito JC) wiring diagram manual scan

[awbacon1]

Well that is if this package ever arrives...took the seller a month to ship and now its in the ether.

Being optimistic...anyone have a manual? I can't find anything except the maintenance manual and that isnt the operator manual and sadly lacks a pinout

Just need info on wheel/pedals. Don't know anyone else with a JC board to ask

Any help would be great...so long as this board in fact appears

 

[andynumbers]

Here's the Densha de Go pinout. Assuming you have the same G connector on your front plane PCB then pin 49 "brake vol" should be your steering. No idea on your pedals though. The accel pins on Densha are digital "buttons".

 

[awbacon1]

Here's the Densha de Go pinout. Assuming you have the same G connector on your front plane PCB then pin 49 "brake vol" should be your steering. No idea on your pedals though. The accel pins on Densha are digital "buttons".

No filter board. JAMMA edge and just the large connector that would have gone into a filter board. JC boards have two generations it seems…”Landing Gear and Dangerous Curves”…and all the other games

GitHub repo for JC emulation talks about differences in GAL placements and changes in hardware, but not pinout

Edit: oh and thanks for posting! Might prove helpful

 

[andynumbers]

I have a landing gear PCB so I know what you're talking about. I don't have any documentation for it though. It has a JAMMA connector that adapts it to the same G connector on its filter board.

 

[awbacon1]

I have a landing gear PCB so I know what you're talking about. I don't have any documentation for it though. It has a JAMMA connector that adapts it to the same G connector on its filter board.

documentation seems super thin