TylerDurden67
Enthusiast
- Joined
- Jul 21, 2015
- Messages
- 110
- Reaction score
- 109
Today, I received a parcel from my friend Vintage Geek with the following message
"Here a gift pcb Pang!
Kisses
ps: the pcb does not work "
Well, at first glance, it lacked a component 14B.
Luckily, it's marked above: 93C46
It is a small Erasable EPROM like ER5911 on a lot of Konami pcb, which is used to save the settings and more.
Luckily, I had one.Quickly solderer and a beautiful blue boot screen.
I check the battery: died.
Oh yeah, pcb pre-cps1 already famous battery system. Well, let's phoenix it.
I will not dwell on the procedure, everything HERE with the set it takes.
good, one boot and ......
tada !!
"RAM ERROR"
Name of a blowjob!
will find that now.
near the Kabuki (Z80 processor customized) is a RAM among many others, a Toshiba TC5563APL-15 (has your wishes), which after being unsoldered and tested Wellon, well proves faulty.
I look in my lists to equivalently (because the small Chinese Ebay is closed, and wait 25 working days to 1 RAM and shipping costs that will also do bad, it's good!)
my equivalent are, how to say ...
... a little problem with weight (she is not to blame the poor, she was born like that!)
Luckily, I found a corresponding on the pcb: NEC D4364CX-15L: XD:
oh yeah but if I removed,how i do now?
And this is where the great Sioux cunning as a monkey surfaced.
Looking out the pcb, at the RAMS, there are various locations for different types of RAM
and well we will use one!
I installed directly on support, so one day she decided to commit suicide ...
... and I recovered the old to put also on a support (if it is not she who fails, it will make me shit to again desolder it)
Note the phoenix here
I also took the opportunity to put others on RAMS support in case
That one, she take it bad a bit (I called Bernadette Soubirou)
It works so it's ok ...
Ok let's go, let's boot again!
Your mother sucks , 
and 
in hell, its not possible !!!
After having checked the eproms, it turns out that my version was a Pang, the phoenix that I have done is a Pomping World (it is the same game, right between these three names, except Pomping me [b ] *%? * [/b] your race pcb that will not be resurrected is the Japanese version)
I frankly not the courage to remake the phoenix, then after checked diffences between Version , I decided to reschedule the 2 eproms the Jap version 2 and 3
(note anyway mess in the labels of EPROM and this original!)
go broom brothel in shit, you on boot
This is better but still not working 100%
Stay tuned to part two
"Here a gift pcb Pang!
Kisses
ps: the pcb does not work "
Well, at first glance, it lacked a component 14B.
Luckily, it's marked above: 93C46
It is a small Erasable EPROM like ER5911 on a lot of Konami pcb, which is used to save the settings and more.
Luckily, I had one.Quickly solderer and a beautiful blue boot screen.
I check the battery: died.
Oh yeah, pcb pre-cps1 already famous battery system. Well, let's phoenix it.
I will not dwell on the procedure, everything HERE with the set it takes.
good, one boot and ......
tada !!
"RAM ERROR"
Name of a blowjob!
will find that now.
near the Kabuki (Z80 processor customized) is a RAM among many others, a Toshiba TC5563APL-15 (has your wishes), which after being unsoldered and tested Wellon, well proves faulty.
I look in my lists to equivalently (because the small Chinese Ebay is closed, and wait 25 working days to 1 RAM and shipping costs that will also do bad, it's good!)
my equivalent are, how to say ...
... a little problem with weight (she is not to blame the poor, she was born like that!)
Luckily, I found a corresponding on the pcb: NEC D4364CX-15L: XD:
oh yeah but if I removed,how i do now?
And this is where the great Sioux cunning as a monkey surfaced.
Looking out the pcb, at the RAMS, there are various locations for different types of RAM
and well we will use one!
I installed directly on support, so one day she decided to commit suicide ...
... and I recovered the old to put also on a support (if it is not she who fails, it will make me shit to again desolder it)
Note the phoenix here
I also took the opportunity to put others on RAMS support in case
That one, she take it bad a bit (I called Bernadette Soubirou)
It works so it's ok ...
Ok let's go, let's boot again!
Your mother sucks
, and in hell, its not possible !!!After having checked the eproms, it turns out that my version was a Pang, the phoenix that I have done is a Pomping World (it is the same game, right between these three names, except Pomping me [b ] *%? * [/b] your race pcb that will not be resurrected is the Japanese version)
I frankly not the courage to remake the phoenix, then after checked diffences between Version , I decided to reschedule the 2 eproms the Jap version 2 and 3
(note anyway mess in the labels of EPROM and this original!)
go broom brothel in shit, you on boot
This is better but still not working 100%
Stay tuned to part two
