SOLD Nanao Ms9-29

[ArcSys101]

Hello Selling another sets of Ms9-29 chassis

Nanao Ms9-29 auto Switch chassis model C1 15/24 khz

Nanao Ms9 29T manual switch C1 15/24khz

Nanao ms9-29 D1 manual Switch 15/24khz can be modded to 31khz

All with remote boards

$300 EACH SHIPPING INCLUDED in US/Canada

Thanks

 

[9999 Damage]

PM

 

[ArcSys101]

Autoswitch Sold

 

[notsonic]

Do you have any toshiba ms-9 yokes?

 

[ArcSys101]

Do you have any toshiba ms-9 yokes?

Usually the yoke is from versus city that used Nanao ms9 and it's a Toshiba monitor Sir

 

[DelsArcade]

I missed the part where they were listed as working, non-working, complete, missing parts, etc. Any more details you can provide would be greatly appreciated.

Thanks in advance!

Del

 

[advans14]

good point!

 

[ArcSys101]

I missed the part where they were listed as working, non-working, complete, missing parts, etc. Any more details you can provide would be greatly appreciated.

Thanks in advance!

Del

Working My Good Sir

 

[DelsArcade]

So they are capped and serviced?

 

[ArcSys101]

So they are capped and serviced?

Yes Sir , pmed

 

[XtraSmiley]

I'll take your other autoswitch one, PM sent.

 

[advans14]

Have any 2930s?

 

[ArcSys101]

Have any 2930s?

No Bro Sorry

 

[bergalon]

Have any 2930s?

I had the same question same question any chance you have neck boards with the light bulb looking HV cut off parts? I have two MS 2903s with those shorted.

 

[ArcSys101]

Up D1 model available and one C1 non autoswitch

 

[AlxUnderBase]

Up D1 model available and one C1 non autoswitch

Good resources ! Great helping with these

 

[ArcSys101]

Good resources ! Great helping with these

Thanks Alex

 

[ArcSys101]

Added One More Autoswitch available

 

[ArcSys101]

This is the C1 autoswitch that have been recapped a Big capacitor with the right value

 

[ArcSys101]

Anyone buying these chassis make sure to check your chassis for capacitors with the correct specs.

I bought one from OP and it seems like it had some shoddy repairs from the previous arcade tech. Spotted two 220uF caps that should've been 180uF and some lifted solder pads :V

Sorry about it and it was checked and now I told the tech what happened and know all have been check again again and tested