What's new
By:

MITSU Batman Forever Sound PCB Repro Instructions and Resources

IMG_3492.jpeg
 
raffy92 said:
Is there a special pinout for STV Batman kickharness ?
Click to expand...


Look at the info from page 1 below:

twistedsymphony said:
On Batman Forever JAMMA button 1 is not used and the 3 buttons that the game DOES use are mapped to JAMMA buttons 2, 3, and 4, so you essentially have to shift them all over by 1 on the JAMMA edge.

It's documented on pages 23 and 24 of the manual: https://www.arcade-museum.com/manuals-videogames/B/BatmanForever.man.pdf

I ran the game at a party last weekend and made a hand-soldered JAMMA pass-through to play the game that shifts the buttons over by 1 and provides power to the audio board.

I'm not really sure why the kick harness needs to be involved though.
Click to expand...
 
twistedsymphony said:
On Batman Forever JAMMA button 1 is not used and the 3 buttons that the game DOES use are mapped to JAMMA buttons 2, 3, and 4, so you essentially have to shift them all over by 1 on the JAMMA edge.

It's documented on pages 23 and 24 of the manual: https://www.arcade-museum.com/manuals-videogames/B/BatmanForever.man.pdf

I ran the game at a party last weekend and made a hand-soldered JAMMA pass-through to play the game that shifts the buttons over by 1 and provides power to the audio board.

I'm not really sure why the kick harness needs to be involved though.
Click to expand...
Hi, do you have any picture to show me how did you do the hand-soldered jamma pass-through ? Thanks
 
brandon.arnold said:
lol @Derick2k WTF! I gotta have that. Give me a PayPal!

Well anyway I just DIY’ed one of my own as well, using the inline JAMMA helper from Arcade Forge, with stereo JAMMA wired for MVS. To whomever may concern: don’t forget to lift the speaker pins on the female side, to keep any game PCB speaker outputs unconnected from the Batman Sound PCB.

Click to expand...
Excuse me, you took the spk - in white wire and spk + in red wire from the jamma to the connector left + for the white wire and right + in red wire ? Or right - in white wire and right + in red wire ? (is it mono? ) I cannot see your connector plugging
 
The sound pcbs? Yes. I sold around 40 units? The adapter that Derick2k was designing? No. He never finished it before he went AWOL.
 
Mitsurugi-w said:
The sound pcbs? Yes. I sold around 40 units? The adapter that Derick2k was designing? No. He never finished it before he went AWOL.
Click to expand...
thank you, yes, I was referring to Derick2k's adapter. I was lucky enough to get the sound pcb. I bought the crimps and headers/plugs to make the wires but held off for the adapter boards.
Hope he's ok and I 2nd the motion to hope it gets open sourced.
 
You must log in or register to reply here.
Back
Top