What's new
By:

Arcade PCB 3D Printed Cases!

The best is 4 parts from original CPS2, up and down for upper part, up and down for the downer part. After a sanding and painting have a very nice case.
 
Still going strong over here…
IMG_3885-compressed.jpeg
 
Does the system12 case works with system11 games like Soul Edge?

a replacement cps2 board case would be amazing. It doesnt have to look like the original, just something that looks clean. It would have to be for both parts (A+B)

my street fighter alpha 3 board is naked and needs a case!
 
jammajunk said:
Does the system12 case works with system11 games like Soul Edge?

a replacement cps2 board case would be amazing. It doesnt have to look like the original, just something that looks clean. It would have to be for both parts (A+B)

my street fighter alpha 3 board is naked and needs a case!
Click to expand...
I don't have any System 11 PCB on hand to verify. Just looking at pictures, I see the system 11 doesn't have the VGA, audio and etc on the side. So IF the PCB is the same dimensions, you would have a big cutout on the side for no reason. If I get my hands on a cheap pcb, I'll be happy to design a case for it :)



I can look into doing a CPS2 repro case too. 100% wont have an original look, that sounds like too much effort LOL. I would at least make it compatible with original cases though. I'll add it to ever growing list of TODO designs lol.
 
I added a list of WIP / Future Case plans to my first post. :)
I needed to keep track of them lol.

Please feel free to request other case designs. If I have access to the PCB, I'd be happy to make the design.
 
Last edited:
Kingtacos15 said:
i just found this post u did some beautiful 3d printed cases. would there be in future u doing cps3 3d printed case?
Click to expand...
Thank you!

I probably won't do a cps3 case since I don't have one and don't plan to get one. Unless someone local to me want to let me borrow it.
 
These cases look fantastic! I'll definitely have to hit you up in a few weeks, I've got an Aliens PCB on the way that'll need a case of it's own!
 
@Robertguy09

Thanks to you (and this thread) i now own a Prusa XL 5ht:D

Would love to see the "Namco system 11 (soul edge, Tekken 1/2 and generic)" - since i got a Soul edge pcb a couple days ago.

And i would love to see a Tekken Tag Tournament Case alteration for Tekken 2b - But have to check if it was the same system :)

Thanks again for your great work!

Btw if anyone in Europe (i am located in germany) needs a print of those cases, just send me a PM (my XL is not yet 100% tuned in, but ...) - I will only ask for filament and powercosts. (Wanted to offer this service, since not a lot of people own larger multi color printers) (@Robertguy09 : Hope you dont mind, if let me know and i will remove this offer)
 
Orakelschaf said:
@Robertguy09

Thanks to you (and this thread) i now own a Prusa XL 5ht:D

Would love to see the "Namco system 11 (soul edge, Tekken 1/2 and generic)" - since i got a Soul edge pcb a couple days ago.

And i would love to see a Tekken Tag Tournament Case alteration for Tekken 2b - But have to check if it was the same system :)

Thanks again for your great work!

Btw if anyone in Europe (i am located in germany) needs a print of those cases, just send me a PM (my XL is not yet 100% tuned in, but ...) - I will only ask for filament and powercosts. (Wanted to offer this service, since not a lot of people own larger multi color printers) (@Robertguy09 : Hope you dont mind, if let me know and i will remove this offer)
Click to expand...
@Sp33dFr34k might need to hook up with our German neighbor as these cases are just a little too big for my Bambu Labs :(
 
Orakelschaf said:
@Robertguy09

Thanks to you (and this thread) i now own a Prusa XL 5ht:D

Would love to see the "Namco system 11 (soul edge, Tekken 1/2 and generic)" - since i got a Soul edge pcb a couple days ago.

And i would love to see a Tekken Tag Tournament Case alteration for Tekken 2b - But have to check if it was the same system :)

Thanks again for your great work!

Btw if anyone in Europe (i am located in germany) needs a print of those cases, just send me a PM (my XL is not yet 100% tuned in, but ...) - I will only ask for filament and powercosts. (Wanted to offer this service, since not a lot of people own larger multi color printers) (@Robertguy09 : Hope you dont mind, if let me know and i will remove this offer)
Click to expand...
VERY NICE! Its a great (and very expensive) printer!
Please feel free to help other print the cases! International shipping for these cases would be pretty pricey. Some of them are FAT.


Mageta the Lion said:
@Robertguy09 sorry i might be blind but where can i "toss a coin to your PCB Case designer"?
Click to expand...
I never actually consider taking tips lol. If anyone really wants, feel free to DM me and I'll share my paypal :P. Please no one feel obligated though! I am happy to share my designs.
 
Robertguy09 said:
I never actually consider taking tips lol. If anyone really wants, feel free to DM me and I'll share my paypal
Click to expand...
Please whisper me. Want to buy you a coffee/beer/eternal life :D

Robertguy09 said:
Sorry for anyone
Click to expand...
Don't be sorry. Life happening is normal. :) - But thanks for letting us know. - Take your time with the cases!
 
You must log in or register to reply here.
Back
Top