Recent content by Aaronr33

Does anyone know if the JST RA 60 pin and analogue (30 pin?) connectors can be bought with wires already terminated, and pigtail ends seperate conductors/wires? Looking to retrofit a new cabinet and will wire controls to terminal blocks then terminate other end to jvs pigtail.

Looking for a bbh pro dongle. Thanks

Dips have nothing to do with ffb. Was video resolution. They are on ringedge jvs daughter board.

SBXX is a ringedge 1 keychip, SDEN is a ringedge 2 0025 Main board Malfunctioning Backup information (one of: TimezoneInfo, BackupInfo, HmPeakInfo, ErrorLogInfo) could not be loaded

If ffb worked with ID6-8 than sonic racing should work with same setup. I have had sonic all stars working on a ringedge that was running ID6AA, think only issue was dip switch setting for resolution that is set on the JVS input board. 838-14592-XX series of boards need to convert the rs232...

There is a thermal overload that opens and disables any power electronics. Maybe yours has failed? Worth checking that. The ffb board you have is the rs422 that doesnt need the rs232/rs422 comm converter. 838-14592-01 (chinese version ) or 838-14592-92 (japanese version) Will work but need...

Have a few options; 1. Disable hardware check for graphics card, but will need to use card similar to stocker. 2. Rename your new card device id to to the original ringedge, so game will pass hardware check. Again need to install similar gpu. 3. Put another ringedge gpu in like for like...

Heres a fix i found. Ringedge 1 would fire up, no video, shutdown, startup again, continue to run with no video. Changed all removable parts one by one for known good working parts and turned out the cpu was bad. One more rinegdge saved.

What happens when you turn on the ringedge. Do fans spin?

Have one ringedge that froze when in attract mode, looks like memory was damaged. Put new memory in and now get this nonsense, game boots but skips honeycomb splash screen quick and then goes straight to test mode? See boot video View: https://youtu.be/S6nFw6rJd-w

Easiest to get a re1 image and xcopy c: drive contents to your re2 drive, overwriting re2 c: drive. I never was able to get patch to work.

https://jjstuff.com/product/sega-naomi-marvel-vs-capcom-2-new-age-of-heroes-rev-a-cartridge-841-0007c-03-bbge-01a4413/

I would maybe try replacing the power supply first. Can even use a atx or consumer supply, just match the wattage at least. They are server grade so are reliable but nothing lasts forever. The mobo turns the power supply on just like any other consumer PC.

PM Agaynte, and order card reader. Card reader needs to be powered, +5vdc or +12vdc, can't remember but one them. Enable card reader in test menu. Connect serial cable to com2 Boot game, start a gane and when promoted to insert card press enter on card reader board. That's it. The device...

Com1 is ffb, com2 is card reader on ringedge. No difference than regular computer. You will need a usb to serial.adapter and set usb port as com2