Recent content by axunworks

Many arcade games have non-standard synchronization signals. Have you tried SNK-MVS and encountered the same issue? I've found it to be very stable on most PVM CRTs, so BVM might be more sensitive to synchronization signals.

HI. You can try installing a BNC cap with a 75 ohm resistor on the BVM sync output. I see your BVM also has a SCART input, is it the same situation?

Okay, thank you for the compliment.

Yes. Only the control is switched (but the jamma needs power to be supplied to the io).

Jamma Switcher Kit Jamma Switcher (JAS-6F): This is a control motherboard and a necessary component. It can connect to the arcade standard jamma to control the power supply, audio and video signals and control signal switching of 6-channel jamma pcb games. It has -5V mode selection...

Application Cases

jjcbox-pro photo

JAMMA CONTROL-BOX PRO /JCBOX PRO Function Introduction: —— Front —— — Standard adjustment card function 1. Mono/stereo switch: Choose according to the actual situation of the arcade board. Most arcade game boards are mono, and the large base of snk mvs can support stereo (switch). Default...

Product options: — JJCBOX PRO (DB15/SNK Control) + power cord SUPERGUN master control box, equipped with adjustment card, DB15/SNK control card and multi-video output card, and also includes an AC power cord. — JAMMA extension cable The JAMMA extension cable allows more free...

There is no more detailed document for the time being. The bottom of JJCBOX has related interface definition identification instructions.

Hi,This may be an early SIGMA 3000 controller. JJCBOX is set according to the later SIGMA 7000（∑9000）controller standard.