Recent content by Benimaru77

OK, so I will put both horizontal and then switch the machine on?

Alright, some news on this: I got my hands on a Naomi Board and with this one, I'm able to access the test menu. With the Chihiro plugged in again: no response. So is it safe to say, that the Chihiro board itself is faulty?

Yes, I've tried also a shorter USB cable. The test service buttons don't react at all, only the demag button.

Ok, understood. Should I remove the green jumpers and start the machine to clear the cmos?

Thank you for your reply Darksoft! I've just replaced both batteries but I receive still the same error screen unfortunately. Where are those jumpers CoolFox has suggested to tamper with? Is the keychip on the back of the Lindbergh, where all those connectors are?

Jep, cleaned every connector with 99% isopropyl alcohol. The 2 red lights start to glow simultaneously after hitting the power switch. Here's a short video:

How? What is the 2032? I'm a nearly a total noob when it comes to Lindbergh. Is there a guide with pictures?

Hey guys, I have an After Burner Climax cab which worked flawlessly until some weeks ago. I played it, switched it of and from the next day on I always receive this error screen. Completely clueless and depressed. Arcade could be such a shitty frustrating hobby... :(

Unfortunately I've already tried a spare I/O and another USB cable... That's what drives me crazy right now. :(

Thanks! Just tested the voltage, everything as it should be. How could I start an I/O check? The demag button works, but the service and test buttons don't respond during this screen:

Thanks for your interest! The connector was marked by myself.

Hey guys, hope there is anyone out there who could help me here: I've got a HotD3 cab which has worked fine for a while. As I have moved to another place, I have decided to disassemble it completely for cleaning purposes. However, I have completely assembled it again and now everything I...