Recent content by bitkid

It's my fault, and I've edited my post above to remove the offending text.

This is so cool. I will definitely be down to use one of my boards for this effort. I have the tools and skills available to do the fine pitch soldering, I'm not terribly worried about that aspect.

PM’d 🤯

My DOJ:WL original PCB is doing essentially the same thing described here. Although my board has a bit of trace repair work done to it after a previous battery leak, so my problem may be related to that or may not be. I think we had an exchange about this on the STG Discord channel fairly...

I plan to buy one as well. I did submit my email on the website for restock notification (phindt).

I recently purchased the Axunworks Power Box Pro. This thing seems really well constructed and was packed very well. However, I was doing some testing with a multi-meter and noticed that the 3V rail retains a live voltage that slowly dissipates after the PSU has been turned off and the power...

Bump. Still looking for a Neo 29 PCB door. My otherwise fairly pristine cab looks sad with a big empty hole in the front.

I got my HAS 5.0 and a few accessories. Very nicely packaged and presented, RGB! Looking forward to restock of the JAMMA extender.

I am aware of Undamned but I saw this open source project (USB2DB15) and thought I’d lend them my support, at least financially. Once I get mine I plan to take a look at the firmware code and see if I can help improve 8BitDo support. If the creator and community can resolve the hardware and...

Thank you both for troubleshooting this so fast. I had just ordered a USB2DB15 maybe a week or two ago with the intention of using it with the HAS (once that is back in stock and I can place an order). Looking forward to receiving my USB2DB15, and awaiting the next in-stock notification for the...

Trying to order from AxunWorks website but there are no payment options listed. I sent a PM on the AxunWorks website as well, from Paul H.

Is this the case with every controller you tried through the USB2DB15 on the HAS 5.0 or just with the 8BitDo controller? I saw your message on the USB2DB15 Discord but it wasn't clear to me if you meant that it wasn't working properly in general, or just with the 8BitDo. They say that the 8BitDo...

I fixed my MS-2931 blue screen problem by replacing the shorted NPN transistor at Q323 with a NOS part, Sanyo C4218. When I fired it up, I had a completely black screen and thought I'd borked it but then I remembered that I had previously turned the flyback all the way down. Whew! Each color...

I’ve found exactly 3 new old stock transistors but I haven’t gotten to replacing the Q323 yet to test my hypothesis. I’ll update this thread once I’ve gotten around to the fix.

Couple of questions: 1. Will any other Hori sticks, newer or older, screw into a Namco PS1 stick without modification? Or is the mounting screw pattern unique to the Namco PS1 stick and case? From photos it looks like the stick from the Hori Wii fight stick has the same screw pattern and...