What's new
By:

Home Arcade System

JohnRambo'sKnife said:
I have one of the Raphnet Gamecube to N64 adapters. It worked for a whole 2 hours before it randomly started turning itself off after 30 seconds of use. Sent a support email and never got a reply. Can't say I am surprised.
Click to expand...
This is a different person, names similar though 🙂
 
JohnRambo'sKnife said:
I have one of the Raphnet Gamecube to N64 adapters. It worked for a whole 2 hours before it randomly started turning itself off after 30 seconds of use. Sent a support email and never got a reply. Can't say I am surprised.
Click to expand...
yeah not the same person. heard he had a good trackrecord thought, but that sucks :(
 
AlxUnderBase said:
USB2DB15 isnt well designed first of all .

I think that USB2DB15 was never tested properly. It doesn't work without a PCB connected, so how did the author aka @Raph_friend the tests of overvoltage protection?
I dont think so he or other testers cranked up voltage on the PSU to 6V WITH a PCB game connected.
Who would do something like that?

imho the best usb to db15 released adapter is the one released by Undamned
Click to expand...


The overvoltage test can be done using any DC source, you introduce the voltage and check the regulator's output pin. In some systems, the USB2DB15 won't work precisely because of the 5V regulation circuit's active protection.

It's strange that a member as senior as you are assuming things about the USB2DB15 without even testing it or delving into the project as a whole. Yes, we had a design error, and it can happen to anyone, from small to large projects.

Are you fighting for some winning side? Because I'm not; the project is Open Source, and my interest is for the community to gain a product that can be made at the lowest possible cost, regardless of where someone lives.

For example, I really like the UD adapter; I have one myself. But for me, living in Brazil, it was VERY difficult to get one at the time, and even now, unfortunately, it's a product that hasn't had updates for a long time.

The next version of the USB2DB15 will have some changes in the 5V protection system, both in the Open Source board and the donor version.

I am very grateful to the friends who believe in me and my projects and support me financially; it helps a lot to want to keep moving forward.
 
Alright, the store has been updated! I've added some new adapters as well as 3/4 player harnesses (these haven't been produced for years). There are also new products that I hope you will like :)

https://rgbslab.com/

dsca4.JPG


dsca3.JPG
pgm5.JPG
 
Picked up 8pin to Scart adapter and was able to simplify my setup, getting vga and vga2scart out of there 💪. Great quality and crazy fast shipping as usual, thanks @RGB !
 

Attachments

  • IMG_4162.jpeg
    IMG_4162.jpeg
    219.6 KB · Views: 173
  • IMG_4163.jpeg
    IMG_4163.jpeg
    403.7 KB · Views: 168
  • IMG_4164.jpeg
    IMG_4164.jpeg
    292 KB · Views: 173
Hi guys, I just wanted to ask. Are there any plans to make an AV multi out for the HAS 5.0? I understand that I can just do scart to component but I plan on bringing this to locals and I already have a minigun too and this would make the set up more easier to bring around and set up.
IMG_7892.png
 
ZeroGoukiX said:
Hi guys, I just wanted to ask. Are there any plans to make an AV multi out for the HAS 5.0? I understand that I can just do scart to component but I plan on bringing this to locals and I already have a minigun too and this would make the set up more easier to bring around and set up.
IMG_7892.png
Click to expand...
This is crazy as I think this is my actual HAS?
 
You must log in or register to reply here.
Back
Top