Recent content by BlueCrab

  1. BlueCrab

    NAOMI 2 won't boot... Any hope for bringing it back?

    Today, for the first time in quite a while, I tried to boot up my NAOMI 2... Attempted booting it with a Net DIMM board that worked the last time it was booted, but got nothing but an ERROR 01. Tried reseating the board several times, cleaning the connectors, but no dice. Showed as an...
  2. BlueCrab

    Naomi 2 NetDIMM blank screen on boot

    Swapping out the ram for that on the other netdimm board was actually one of the first things I tried, since I've had PC100 sticks randomly die on me before... But alas, no dice. :(
  3. BlueCrab

    Naomi 2 NetDIMM blank screen on boot

    It's definitely the bottom board of the one netdimm. I've swapped out the top boards and it doesn't seem to affect the ability to boot on either of them. I'll try to snap some pictures tomorrow (I didn't see anything obviously bad on cursory inspection), but I think that unless it's something...
  4. BlueCrab

    Howdy from a Dreamcast veteran

    Trying to port KallistiOS to work on a NAOMI or NAOMI 2 board is actually the main reason I bought the board I have. :)
  5. BlueCrab

    Naomi 2 NetDIMM blank screen on boot

    Booting with nothing in the slot and booting another dimm board (also a netdimm, I should add) both work fine. It's just this one that is not working. I tried today to boot with the dimm board out of the case, and the same thing happens -- a blank screen on boot. This is the case with or...
  6. BlueCrab

    Howdy from a Dreamcast veteran

    Thanks for the warm welcome. :)
  7. BlueCrab

    Naomi 2 NetDIMM blank screen on boot

    Unloaded, I'm pulling exactly 3.30v, according to my meter. With the system running, I measure 3.26v on the 3.3v pins on the filter board. I should also mention that I have another DIMM board which boots up fine, so I'm pretty sure it's not a voltage or mainboard issue.
  8. BlueCrab

    Naomi 2 NetDIMM blank screen on boot

    I have a Naomi 2 board that I purchased a few weeks back along with a NetDIMM board with firmware 4.02. Earlier today, it worked just fine. However, now it is doing nothing but showing a blank screen on boot. I don't even get the NAOMI 2 logo or anything. Specifically, my monitor shows a black...
  9. BlueCrab

    Howdy from a Dreamcast veteran

    Hello all. I'm a veteran of the Dreamcast homebrew scene -- currently the maintainer of KallistiOS (the homebrew SDK library). I recently picked up a NAOMI 2, so I figured this might be a good place to join up for various discussions.
Back
Top