Recent content by bullet_curtain

103Z = 10nF +80%, -20% Either a capacitor array or network not an IC. Voltage Rating?

Hi there, i'm curious what are the dimension of the black mask on the glass pieces are that cover the instruction sheets. The original mask was super fragile and while i've cleaned them during the restauration project, they just came off. I like to repaint the edges of the glasses again, so i...

Aw man, thanks for chiming in! My ini was P2 commented out somehow. player_1_controller=16D0:10BE.0001 ;player_2_controller=16D0:10BE.0002 Edited it and then P2 was working in 1944. Back to SF2CE both players present but swapped. Im an idiot, i go the buttons/stick hooked via a MAK and DB15...

Thanks for your reply, i didn't had that mapping in the downloader.ini, so that was it what screwed the config while doing update all? I've Intergrated it now. I replaced the ALL the files in the input config folder with those from the github, so it should be set up from scratch and i've...

Totay i sat at my cab. I can't start P2 somehow. In the past this was posisble, i think i've tested it with a street fighter core. I retried that (remembering that A NEW CHALLENGER sound) again, nothing happens. Tried a few other cores, just P1 START gets recognized. And weirdly it seems after...

I haven't tried personaly because i trashed the idea, but as i my initial idea was using ultimatemister /w brooks controllers, i was looking into this bit. Did you had a look at this page? https://mister-devel.github.io/MkDocs_MiSTer/basics/input/#default-joystick-player-assignment-method at the...

Thank for chiming in @ShootTheCore ! No i've built te latest version of the Franks Supergun it looks like this: https://www.arcade-projects.com/attachments/minigun_3d_r2-5-png.26092/ Where one can enable B4/5 of P1 + P2. The main reason for using the JAMMA with the MiSTER is, that it should be...

Hi Guys, i've got two questions regarding mistercade. :) Basically n00b questions but i tend to aks first before i pdoduce smoke. ;) I've been a MiSTER user quite some time using a ultimatemister via RGB SCART. For my restored cabs i've bought brooks ultimate fighting boards, but those seem to...

@nassekova I just stumpled over your post in the mistercade thread since i was reading through it. You had a pic there where you measure between GND and LIVE, also you mentioned that you're livin in an old house. This (old house) reminded me about the Nullung (German Word i'm missing the proper...

I think i need to try this way for this certain motherboard, i was afraid of lowering the voltage to much. It might be that i had lower voltage, before i fiddled on the +5V going slightly up tiny steps with no success. As you say i did also build 2 superguns, so one might have had the "better"...

Hi there, i got a PGM Motherboard which worked well for a while. But then it started to have an odd issue, after a while (5-10minutes) it just resets to the service menu. At this stage when i do a power cycle, it just instantly goes to the service menu again or occasionally boots the game, but...

Hi there, bought 2 naomi universals for a good price, well they were basically just "empty shells". CRT's where present but no electronics (chassiss, i/o etc), besides that one monitor had a shorted deflection coil and the 2nd was some kind of vga-ized consumer tv but i didnt' know the brand...