Recent content by cccpUrien

It works! All that I had to do was swap in a different CD of the game images. Thanks all for the help and support!

OK so I've made some progress....I tried loading just the regular SF3 game. The SIMM in slot one still reads as "NG" in the test menu, but the game actually retains its data after powering off. When I boot the system it says "reading CD", then it has me select a language, and then boots as...

Hi Mitsu! I only played a few rounds, but no issues. There are no errors while loading the game, but the data becomes corrupt after powering down. The only discernible issue that I can see while the game is powered up is the "NG" message in the SIMM test menu.

Thanks for the encouraging words! I'll definitely keep working at it :)

Hmmm, I'm a bit stuck now. Both motherboards show SIMM1 as NG even after shuffling SIMMs around. Any ideas for further steps?

Ah, good to know, thank you. I tried reseating SIMM 1 and am now loading the game once more. I have a spare CPS3 motherboard that I bought on ebay for such an occasion. If reloading the game doesn't work then I'll try taking one of the SIMMs from there. I'll keep you guys posted :D

I swapped and cleaned the SIMMs and upgraded the error to "Error 16" :thumbsup: Swapping out the SIMM at location 6 let me load the game again. Once loaded, I went into the test menu and ran a test on the SIMMs. All clear, except now SIMM 1 is NG. Uh oh. Rebooting the machine made me lose the...

Got it, thanks! Should I try cleaning the slot first before trying a different SIMM? Or is it safe to assume that the SIMM is bad? Any cleaning tips?

Hi all, I finally had some downtime so I took on upgrading my Street Fighter 3 2nd Impact cabinet to 3rd Strike using the Darksoft cart. One of my 128mb SIMMs was listed as 'NG' during a memory test, so I swapped that one out with a new SIMM and then added another so that I have sufficient...

1 AES please!

I received my SIMMs earlier this week. Thanks everyone for the awesome work!

PM sent.

Did this ever get resolved? I.e. do your SIMMs still read as NG? I'm seeing an "NG" message in regards to SIMM 5 and I'm wondering how to resolve it. Thanks!

Thank you guys for moving forward with this project. I will take 4 SIMM chips once they are available.