Recent content by Clayton

Interestingly the replacement board didn't fix the problem. I can confirm the dip switch is set to 1, 2 and 5 OFF and remainder switches ON. Anyone got any other ideas or suggestions that i should check?

Removed the side board and interestingly found out someone had been there before - all 5 of the ON switches were soldered into place. Received advice that it could still possibly be the dip switch. Will be replacing the entire board that the dip switch sits on and see how that goes. Will...

Found another clue which suggested checking whether the dip switch has failed. Tested dip switches - all 8 working fine. Any other suggestions?

Thanks. Tried with 1,2 and 5 OFF and rest ON and getting the same result. Green screen with Caution 51.

Hey there. I have an OutRun2SP game running on a Chihiro Type 3 and I'm getting a Caution 51: "Wrong video output setting of horizontal scanning frequency". The video colour has strangely gone green as well. I was told it could be one of the dip switches that has been knocked or changed...

OK. Well I started troublshooting by replacing the compact flash card reader. So far so good - booting up without any problems at all now. Will monitor over the next week or so.

Hi there. I have an interesting problem with my Chihiro which is running Outrun 2 SP using a compact flash card. When i start my machine the Chihiro takes a bit of time to react before showing the white Chihiro screen. Sometimes it sits on a black screen for 5 seconds, sometimes its 20...