Recent content by Crown Arcade Shop

I listed ARCADE2JVS on my website - https://bit.ly/3Tgp9IJ * Up to 2 Player gaming (6button db15 arcade stick) * Built-in TEST/SERVICE switch * type C cable for power supply (50cm) * AM-BM cable for JVS signal (1.5M) * First 3 buyers get free NeoGeo AES style housing

Arcade2JVS works well with TTX3, but sometimes the recognition in NAOMI2 is unstable, so I couldn't finish the development. I recently changed the SENSE line circuit and it works fine. I ordered the PCB with the modification, and I think it will be completed next week. Housing finished :)

Sample housing of ARCADE2JVS is arrived. It printed in black resin and I'm very satisfied with quality. Type C cable is for powering the ARCADE2JVS. I tried plugging in other Type C cable, but it didn't fit. I didn't realize that there was no standard for the type C cable housing until now...

Yes, it works without mods.

Introducing the board "HYPERDRIVE ARCADE", which will be listed next week. This board is an arcade encoder using DB15 pins (also for Neogeo) that can be implemented on an 8-button joystick by modifying it. It has a 4-button and 6-button remapping function, and when you press and hold the...

I needed PCB Connector for Neo Geo Controller, I had to find a solution because D-SUB 15 Connector cannot be inserted into the Neo Geo. You need A. FC Controller Port Connector from Aliexpress https://www.aliexpress.com/item/1005006132114859.html There is one part I need, but they don't seem to...

https://crownarcade.co.kr/products/bkm-129x-clone-rgb21-vga-card-for-sony-pvm-bvm-monitors Thanks for notifying me.

I designed ARCADE2JVS Housing (for 3D print). Side button works as TEST/SERVICE. (board design is changed for this housing) As you see, the design of the housing is inspired by the Neogeo AES.

Second Sample PCB is arrived today. I've uploaded new firmware on board and works great on TTX3 and NAOMI. Final product have two angled tact switches (TEST & SERVICE) on left side. TILT button will be deleted.

I referenced td-io for the circuit design, Also I referenced teensy jvs & jvs wip for the firmware design.

I finalized a 2nd sample board and send it to JLCPCB. Type C is for power supply and firmware update. USB B is for JVS.

https://twitter.com/gameparts_korea/status/1727246306115252325 I've tested new JVS-IO for two DB15 arcade sticks. And works fine on Taito Type X3. The sample board has a Raspberry Pi Pico, but the product will have rp2040 ic. (Because the Pico lacks 4 GPIOs) I hope this board will also work...

DONG-A is a South Korean company. In Europe or the US, you may refer to HEYCO PART NO.

https://bit.ly/3SFZcCr HYPERDRIVE PENTA is PS5 Arcade Encoder Board with very low latency and genuine Playstation controller ic. PENTA is only working on PS5 (not working on PS4) https://bit.ly/3spO3Lt HYPERDRIVE PS4 is inexpensive PS4 Arcade Encoder Board, and also works on PS4 games on PS5...

I used "5NF 16" aka "SR5KN4" But you don't have to use it, and you can also use a similar or larger cord push which sold in your country.