What's new
By:

ARCADE2JVS - JVS IO for two DB15 Arcade Sticks

Crown Arcade Shop

Crown Arcade Shop

Enthusiast
Joined
Jul 12, 2021
Messages
69
Reaction score
181
Location
Seoul, KR
KakaoTalk_20231122_175607790.jpg

https://twitter.com/gameparts_korea/status/1727246306115252325

I've tested new JVS-IO for two DB15 arcade sticks. And works fine on Taito Type X3.

The sample board has a Raspberry Pi Pico, but the product will have rp2040 ic. (Because the Pico lacks 4 GPIOs)

I hope this board will also work with naomi, exa, etc. (to be tested)
 
Very nice!
Are you basing the firmware on td-io, or is it custom?
 
KakaoTalk_20231206_111915506.jpg

Second Sample PCB is arrived today.

I've uploaded new firmware on board and works great on TTX3 and NAOMI.

Final product have two angled tact switches (TEST & SERVICE) on left side. TILT button will be deleted.
 
KakaoTalk_20240112_134943181.jpg

KakaoTalk_20240113_143955521.jpg

KakaoTalk_20240112_135022401.jpg

Sample housing of ARCADE2JVS is arrived. It printed in black resin and I'm very satisfied with quality.

KakaoTalk_20240112_145546865.jpg

Type C cable is for powering the ARCADE2JVS. I tried plugging in other Type C cable, but it didn't fit.
I didn't realize that there was no standard for the type C cable housing until now.

Therefore, the design of the production version was changed as follows.
KakaoTalk_20240113_153931323.png

Boards are already completed, and I expect to start selling them in January once the housing is produced.
 
KakaoTalk_20240206_195433933.jpg

Arcade2JVS works well with TTX3, but sometimes the recognition in NAOMI2 is unstable, so I couldn't finish the development.
I recently changed the SENSE line circuit and it works fine.

I ordered the PCB with the modification, and I think it will be completed next week.

KakaoTalk_20240124_170052592.jpg


Housing finished :)
 
Is this plug n play for jvs? Or do I need a jvs sega i/o chained?
This would be great for when I take my naomi to friends and only want to pack sticks.
 
Can I use a Saturn to DB15 Controller Adapters for Neo Geo for usage of Saturn pads on my JVS system?
 
Crown Arcade Shop said:
I checked the inventory and fixed stock.

Only a few number were left, so I started additional batch.
Click to expand...
I was the last guy to place an order
I originally wanted to purchase two but only one was available to purchase

I'll grab another now that they're available again
:D
 
Just a question regarding input lag
How much delay is there?
Would it be less or more compared to other JVS I/O's like the Capcom I/O?

I'm assuming you can pair this up with other converters like the Undamned as well?
 
I ordered one of your ARCADE2JVS units. My Naomi 2 detects it just fine. I haven't tested with a standard Neo Geo controller yet but I was trying to use the NeoBT adapter and a 8bitdo controller. I can't seem to get it to sync while plugged in. Have you tested with NetBT or the Undamned USB adapter?
 
djanice1980 said:
I ordered one of your ARCADE2JVS units. My Naomi 2 detects it just fine. I haven't tested with a standard Neo Geo controller yet but I was trying to use the NeoBT adapter and a 8bitdo controller. I can't seem to get it to sync while plugged in. Have you tested with NetBT or the Undamned USB adapter?
Click to expand...
I can confirm the Undamned USB Adapter works
 
You must log in or register to reply here.
Back
Top