Recent content by djpweb

If it's to use the infinikey-CSP2, you don't need to inject the key, it's already in the infinikey. Just replace the chips by the original non-Phoenixed and install the infinikey with the right code selected.

I know, that was also my isssue :)

Before getting a new one try this : Strange process but fixed mine.

Well, color me surprised, it does work :) Hacked proto, Dupont Wires powered, will do clean add-on board and print it with OSHPark soon. I won't do it right now since I don't have an arcade cabinet yet, but it's good to know I can plan for it :) (PS: No contrast pot on the test, which explain...

No problem, I will first try on a Raspberry through GPIO to see how chained HD44780 react, don't want to take too much risks.

Just wanted to say Thank You to Undamned :) Using it with a Hori Fighting Edge PS4 right now and it's awesome ! (just got worried until I found the L1+L2 trick at boot on the latest firmware)

OK, thanks :) I will share the results once I receive my 2nd screen.

Is there a way to use 2 screens at the same time ? for example if I solder a second one over the first one's 16 connections ? Or simply using a 14 pins connector splitter. I would like to use one integrated on the CPS2 B-Board when I play in consolized form and a second one I can plug when in...

As a cautionary tale : even if there is no solder ball on the jumpers, even after cleaning carefuly with solder wick, TRIPLE CHECK ! there was tiny traces on 2 jumpers which kept them closed while I was sure they were open. Enjoy this noob mistake and tell your kids to know better. Can be...

Hello, I've just finished installing my CPS2, install went smoothly, replace the PAL F of my rev 4 board with a G, soldered everything, checked continuity of jumpers and pins with a multimeter... and everything work except audio which comes with a very high pitch variation. Very easy to observe...

Hello, I'm still preparing everything I need for my CPS2 consolization and I'm curious if there is an "easy" way to have both 2P 6buttons and 4P 4 buttons mappings available ? I'm currently planning to use Undamned UD-USB Decoders on a 2 players configuration but being able to play AVP and D&D...

Awesome, thanks !

Hello all, I'm preparing my todo list to consolized a CPS2 but the Power Supply question is still unclear to me. I was about to get a PicoPSU to power the board : http://www.mini-box.com/picoPSU-160-XT But the manual doesn't give any info on the -5V spec (Pins 5/E on jamma)... On some ATX 1...

I think you should add "MVS" in the firmware archive, because the number of dumb people who flash it on AES is really high... and I'm one of them || (I followed both thread because there is more info on the MVS one then forgot to go back to the AES one for the downloads)

Got it this week, printed a new cover (more in line with the traditionnal AES layout), updated it, and enjoying it a lot right now. Happy I didn't wait for the "other one" :) I would love to be able to choose a menu skin (one closer to the Unibios 4.0 popup interface), but honestly it's an...