Recent content by FrancoB

Yes, it's the only one in the ones above that is three layers. (Black back, white 'outline' and then pink or green on top). I could either have inlayed or stacked the white and pink/green parts. I decided to do the latter to give it a bit more depth plus inlaying it would have wasted 90% of the...

Sure, shouldn't be too much of a problem. Feel free to add some notes to the order form and we can discuss via email :thumbup: I can get various mirrored acrylics and I have some brushed steel too. Another option would be to use something like 'Midnight Black' which is a nice matte black if...

I'm afraid it's not something I'm going to be able to do in this series. Logos like that have multiple colours/gradients on a single piece and I'm mainly limited to working with flat colours. Manufacturer logos work well as they use flat colours by design but game logos tend to be more complex...

Thanks all! ^^ The order form is up [here]. I've left it fairly basic as there is no way I can capture all of the options/sizes etc. There are just a couple of sections to leave your requirements and email address. I'll then be in contact to discuss what you need.

I don't use them all the time but they do have their place. I made one a while back which was loosely based off of one of Vector3Ds earlier versions. I used a linear rail on the front to give flexibility for mounting other tools. I would definitely pick up some of the tips rather than a...

Funnily enough I have a CO2 laser now so I could cut them for you. I even have some of the same material that I used in this project 8) Shoot me a PM if you want to discuss.

Just to get a thought down whilst its in my head, something like this might look good if you wanted both.... MS Paint skillz ahoy! Green LEDs on the top/bottom that curve round the edge and two pink strips on the sides.

Love it! That would indeed look fantastic. I'm more than happy to work on custom stuff, that's where the fun is ^^ I do have some brushed stainless effect acrylic in stock currently, it might be a little dark but there are other silver options I can get. I've got a swatch of about 120...

Cheers bud. This was semi-secret plan #2 of [REDACTED] ;) The controllers I got were meant to be supported by various devices but it was LIES. I'm going to look at some others. Cheers guys! I'm really happy with how they've come out and it's been good fun learning some new skills along the...

I've been working on various game room signs for myself and others recently: View: https://www.youtube.com/watch?v=___Qxkp3W0o High res images of the above can be viewed in [this] gallery. Signs are made from high quality cast acrylic. The backs are typically 5mm with 3mm detailing on...

Great freebie! Kudos! :thumbup:

I recently finished a small run of these for some friends and I have two left over. Enables you install a 3rd party PSU with screw terminals to an Egret II. 24/0.2 cable used throughout and securely soldered at both ends. £25 each set + shipping. Both now sold

Great stuff @Lemony Vengeance - that looks like a ton of work! Well done!

Cheers guys! ^^ Order form is now online [here] I've added a couple more CAD examples to the OP and to the order form. It's a little tricky to try and capture orders due to the thousands of possible variations/combinations and the limitations of google forms. Hopefully it's straight forward...

I've been working on some arcade token keyrings for use with your cab keys or otherwise. I've made a few examples of a few of the possible combinations: Sega Astro City - In various tinted acrylics, all with silver bezels: Sega Astro City - Clear and light tint with different colour...